Installation Instructions
WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• The air conditioner can be installed
without the accordion panels if needed
to fit in a narrow window. See the
window opening dimensions.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
• Follow the dimensions in the table and
illustration for your model.
Models A B
AEQ05, AEQ06, AEV05 13″ min. 24 1/2″–38 1/8″
AEM05, AEM06,
AEM08, AEQ08 13 5/8″ min. 24 1/2″–38 1/8″
1
A
(With accordion panels)
PREPARE THE AIR CONDITIONER
Install the top mounting rail with 3 Type B
screws from the outside of the case.
Slide the left and right accordion panels
into the top and bottom mounting rails.
4
A
B
Top mounting rail
Bottom mounting rail
Top left
Top right
B
STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will
keep it from draining properly.
To adjust for this, attach a piece of wood to
the sill.
WOOD PIECES
WIDTH: 2″
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness, place
a piece of wood on the sill to make it 1/2″
higher than the top of the storm window
frame or the vinyl frame.
Attach securely with nails or screws provided
by the installer.
2
1/2″ higher
than storm
window
frame
Storm window
frame
Wood
Sill
1/2″ higher
than vinyl frame
(on some windows)
Vinyl frame
10
ATTACH THE TOP MOUNTING
RAIL SEAL STRIP
Remove the backing from the top mounting
rail seal strip and attach the seal strip to the
bottom of the top mounting rail, along the
front edge.
3
Top mounting rail
Remove
backing
from seal
strip
Top mounting rail
Seal strip
FRONT VIEW
