503388
31
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
29
ENGLISH
A GEM WS disk can contain Style file, each of which can
hold up to 32 Prog.Styles. GEM WS Prog.Styles are similar,
even if not exactly identical, to the CD30 Prog. Styles (88-
95).
The CD30 can only load 8 of the 32 Styles contained in a
GEM WS file. Search is carried out in sequence in Styles
from 1 to 8, then from 17 to 24. The CD30 always reads the
first 8 Styles it finds:
1-8 9-16
17-24 25-32
WS FILE
How to load a GEM WS Song pattern
1. Insert the GEM WS disk in the CD30 disk drive.
2. Press [DISK] to enter the DISK edit mode.
3. “Load” is selected. Press DISK to call up the Load proce-
dure.
4. GEM WS file have “.ALL” extensions. The “.ALL” type is
already selected on the display. Press [DISK] to start the
loading procedure.
5. The first file found on the GEM WS disk appears. Use the
[TEMPO-DATA] buttons to select the file you want.
6. Once the file to be loaded is shown on the display, press
[DISK] to load that file. The question “Load/sure?” appears.
7. Press [DISK] to confirm, or the [ESC] buttons to interrupt
the loading procedure.
The new RealSong is memorized in location 99. The whole
memory content is substituted by the file “.All” as soon as
it is loaded.
8. Since GEM WS is not a GeneralMidi instrument, it may
be necessary to set the track Program Changes manually
using the EDIT function.
How to load a GEM WS Prog.Style
1. Insert the GEM WS disk in the CD30 disk drive.
2. Press [DISK] to enter the DISK edit mode.
3. “Load” is selected. Press DISK to call up the Load proce-
dure.
4. GEM WS file have “.ALL” extensions. The “.ALL” type is
already selected on the display. Press [DISK] to start the
loading procedure.
5. The first file found on the GEM WS disk appears. Use the
[TEMPO-DATA] buttons to select the file you want.
6. Once the file to be loaded is shown on the display, press
[DISK] to load that file. The question “Load/sure?” appears.
7. Press [DISK] to confirm, or the [ESC] buttons to interrupt
the loading procedure.
The new Prog. Styles are memorized in locations 88-95.
As soon as the “.ALL” file is loaded, it erases the whole of
the memory content.
Dynamic level conversion (“WS Dynamic Level” function)
For every note, MIDI instruments transmit, receive or record
the dynamic value (or Velocity). The dynamic is the intensity
with which the note was played. Its value can range between
1 (lowest intensity) and 127 (highest intensity).
Since the GEM WS dynamic is different to that of the CD30,
it may be necessary to edit the dynamics of the Song Pat-
terns and Prog.Styles loaded from GEM WS disks. If this is
not done, the tracks loaded may sound “too soft”, owing to
these different dynamics.
The “WS Dynamic Level” function in the DISK acts as a filter
for GEM WS data. You may find it necessary to program this
function before loading a Song Pattern or a Prog.Style file.
1. Press [DISK] to enter the DISK mode.
2. Find the “Dynamic Level” page using [PAGE>]:
3. Use the [PAGE] buttons to move backwards and forwards
between the track and assigned value.
4. Select the track and the “Level” value assigned using the
[TEMPO-DATA] buttons.
Four dynamic levels are available (Level 1 is selected by
default):
- Original: the same dynamic value as the GEM WS;
- Level 1: values from 64 to 127 (lower values are raised
to 64);
- Level 2: values from 96 to 127 (lower values are raised
to 96);
- Level 3: all dynamics set to 127.
5. Exit the DISK mode using the [ESC] buttons. The settings
remain in memory even when the instrument has been
switched off.
Reading Midi Files
Midi Files are particular files which allow the CD30 to read
from disk Songs which have been created using computers
or other musical instruments which incorporate sequencers.
Songs in Midi file format are so widespread that can be found
freely available in retail outlets.
How to create a Midi File with a sequencer
Normally, sequencers or musical instruments save Songs in
their exclusive format, which does not permit the exchange
of data with other instruments. Fortunately, almost all com-
puter based sequencers and certain musical instruments can
also save Songs in the exchangeable ‘Midi File’ format.
Copy the Midi Files onto a 720 kb disk formatted in Ms-Dos
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für General Music CD20 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info