Bedienungsanleitung General Music CD30 (Seite 18 von 36) (Englisch)

503389

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

limitation.

4. Only one track at a time can be recorded in RealSong, so

only one track button will flash at a time.

Press the button which corresponds with the track to be

recorded repeatedly until its track name appears on the

display.

5. Select the Sound you want to assign to that track. Only

drumkit sounds can be assigned to the Drum track.

6. Adjust the tempo before starting to record. The new value

will become the initial tempo for the Song.

7. Activate or disactivate the effects; select the effects re-

quired.

8. Set the initial track volume using the buttons in the MIXER

section.

9. The split point cannot be changed, because the recording

is made with no keyboard range limits, one track at a time.

Recording

1. Press [START/STOP] to start recording.

2. During recording you can change Sound, Tempo and Vol-

ume, use the Damper pedal, activate/disactivate and

change the Effects.

3. Use [START/STOP] to stop recording.

4. The led of the recorded track comes on. An asterisk (*)

appears next to the track name:

5. Select another track and continue recording. If you overdub

a track which is already recorded, the new notes are added

to the track. Use the Erase function, described later, to

cancel any notes which have been added in error.

To exit the “record” mode

Press the two [ESC] buttons together.

The Song name

1. If necessary, press [CHORDS] to put the song into the

“record” mode.

2. Press [CLEAR] to call up the edit and erase menu.

3. Press the [NAME] button (on the keypad) to enter the Song

name or edit an existing name.

4. Use the keypad to key in the letters/numbers (each key

has three characters, which appear one after the other in

cycles each time the key is pressed).

5. Press [PAGE>] to move to the next space. Press [PAGE<]

to move back a space.

6. When you have finished, press both [ESC] buttons to exit

the “record” mode and confirm the Song name.

Changes and corrections

SongStyle and RealSong can be modified by re-entering the

record mode and using the functions called up by the [CLEAR]

and [QUANTIZE] buttons.

Editing the Sound and initial volume

1. Adjust the track volumes (using the buttons in the MIXER

section).

2. Press [CHORDS] to return to the “record” mode. The flash-

ing |R appears on the display.

3. Select the track where you want to change the Sound.

4. Select a different sound for that track.

5. Press [START/STOP] to start recording.

6. Immediately after the initial “count in”, stop the recording

using [START/STOP].

7. Press a different track button if you want to edit another

track. Alternatively, press [ESC] to exit the “record” mode.

How to erase parts (CLEAR)

1. Press [CHORDS] to return to the record mode. The flash-

ing |R appears on the display.

2. Press [CLEAR]. The menu of edit and erase operations

appears:

3. Press [CLEAR] to select “Clear”. The CLEAR function ap-

pears on the display:

4. Use [TEMPO-DATA] to select the track you want to can-

cel.

In SongStyle you can choose Chord, Lower, Upper, Com-

mon, Tempo, and Pads tracks. In RealSong you can

choose Drum, Bass, Acc1, Acc2, Lower, Upper, Common,

Tempo (use the ERASE function on the Drum part to can-

cel the pads). “All” erases the whole Song.

5. Press [CLEAR] to confirm the track selection.

6. The question “Sure?” appears on the display. Press

[CLEAR] to confirm, or the two [ESC] buttons to cancel

the erase procedure. Alternatively, press one of the track

buttons to cancel the procedure and return to “record”.

Erasing a note or a percussive instrument (ERASE)

1. Press [CHORDS] to return to the record mode. The flash-

ing |R appears on the display.

2. Press [CLEAR]. The menu of edit and erase operations

appears:

3. Select “Erase” with the [PAGE>] button.

4. Press [CLEAR] to enter the ERASE function:

5. Select the track on which the note is to be erased using

[TEMPO-DATA].

6. Press [START/STOP] to start Song playback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

General Music CD30 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info