Bedienungsanleitung General Music CD30 (Seite 31 von 36) (Englisch)

503389

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

A GEM WS disk can contain Style file, each of which can

hold up to 32 Prog.Styles. GEM WS Prog.Styles are similar,

even if not exactly identical, to the CD30 Prog. Styles (88-

95).

The CD30 can only load 8 of the 32 Styles contained in a

GEM WS file. Search is carried out in sequence in Styles

from 1 to 8, then from 17 to 24. The CD30 always reads the

first 8 Styles it finds:

1-8 9-16

17-24 25-32

WS FILE

How to load a GEM WS Song pattern

1. Insert the GEM WS disk in the CD30 disk drive.

2. Press [DISK] to enter the DISK edit mode.

3. “Load” is selected. Press DISK to call up the Load proce-

dure.

4. GEM WS file have “.ALL” extensions. The “.ALL” type is

already selected on the display. Press [DISK] to start the

loading procedure.

5. The first file found on the GEM WS disk appears. Use the

[TEMPO-DATA] buttons to select the file you want.

6. Once the file to be loaded is shown on the display, press

[DISK] to load that file. The question “Load/sure?” appears.

7. Press [DISK] to confirm, or the [ESC] buttons to interrupt

the loading procedure.

The new RealSong is memorized in location 99. The whole

memory content is substituted by the file “.All” as soon as

it is loaded.

8. Since GEM WS is not a GeneralMidi instrument, it may

be necessary to set the track Program Changes manually

using the EDIT function.

How to load a GEM WS Prog.Style

1. Insert the GEM WS disk in the CD30 disk drive.

2. Press [DISK] to enter the DISK edit mode.

3. “Load” is selected. Press DISK to call up the Load proce-

dure.

4. GEM WS file have “.ALL” extensions. The “.ALL” type is

already selected on the display. Press [DISK] to start the

loading procedure.

5. The first file found on the GEM WS disk appears. Use the

[TEMPO-DATA] buttons to select the file you want.

6. Once the file to be loaded is shown on the display, press

[DISK] to load that file. The question “Load/sure?” appears.

7. Press [DISK] to confirm, or the [ESC] buttons to interrupt

the loading procedure.

The new Prog. Styles are memorized in locations 88-95.

As soon as the “.ALL” file is loaded, it erases the whole of

the memory content.

Dynamic level conversion (“WS Dynamic Level” function)

For every note, MIDI instruments transmit, receive or record

the dynamic value (or Velocity). The dynamic is the intensity

with which the note was played. Its value can range between

1 (lowest intensity) and 127 (highest intensity).

Since the GEM WS dynamic is different to that of the CD30,

it may be necessary to edit the dynamics of the Song Pat-

terns and Prog.Styles loaded from GEM WS disks. If this is

not done, the tracks loaded may sound “too soft”, owing to

these different dynamics.

The “WS Dynamic Level” function in the DISK acts as a filter

for GEM WS data. You may find it necessary to program this

function before loading a Song Pattern or a Prog.Style file.

1. Press [DISK] to enter the DISK mode.

2. Find the “Dynamic Level” page using [PAGE>]:

3. Use the [PAGE] buttons to move backwards and forwards

between the track and assigned value.

4. Select the track and the “Level” value assigned using the

[TEMPO-DATA] buttons.

Four dynamic levels are available (Level 1 is selected by

default):

- Original: the same dynamic value as the GEM WS;

- Level 1: values from 64 to 127 (lower values are raised

to 64);

- Level 2: values from 96 to 127 (lower values are raised

to 96);

- Level 3: all dynamics set to 127.

5. Exit the DISK mode using the [ESC] buttons. The settings

remain in memory even when the instrument has been

switched off.

Reading Midi Files

Midi Files are particular files which allow the CD30 to read

from disk Songs which have been created using computers

or other musical instruments which incorporate sequencers.

Songs in Midi file format are so widespread that can be found

freely available in retail outlets.

How to create a Midi File with a sequencer

Normally, sequencers or musical instruments save Songs in

their exclusive format, which does not permit the exchange

of data with other instruments. Fortunately, almost all com-

puter based sequencers and certain musical instruments can

also save Songs in the exchangeable ‘Midi File’ format.

Copy the Midi Files onto a 720 kb disk formatted in Ms-Dos

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

General Music CD30 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info