Bedienungsanleitung General Music GK360 (Seite 21 von 28) (Englisch)

503367

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Page17

owners manual

gk360



The Transpose

The TRANSPOSE function allows you to change the pitch of the instru-

ment in semitone steps, up to a maximum setting of 12 semitones above

or below standard pitch. If you press either the [+] or [-] TRANSPOSE

buttons once only, the display shows the normal pitch setting (00).

Press the [+] or [-] TRANSPOSE buttons repeatedly to raise or lower the

pitch in semitone steps until you reach the value required. The cancel

the Transpose setting and restore normal pitch, press both [+] and [-]

TRANSPOSE buttons at the same time.

Tune

The TUNE function allows you to ﬁ ne tune the instrument in steps on one

cent at a time (cent = one hundredth of a tone). If you press either the

[+] or [-] TUNE buttons once only, the display shows the normal tuning

setting (00) corresponding to the standard A = 440 Hz. Press the [+] or

[-] TUNE buttons repeatedly to raise (max: 50) or lower (max: 50) the

tuning until you reach the value required. The cancel the Tuning setting

and restore normal pitch, press both [+] and [-] TUNE buttons at the

same time

Pan

The PAN function allows you to change the stereo pan position of the

overall sound, moving the sound at the speakers either to the left or to

the right. If you press either the [+] or [-] PAN buttons once only, the

display will show the normal setting corresponding to Pan at the cen-

tre (00). Press the [+] or [-] PAN buttons repeatedly to pan the overall

sound to the left (max: 07) or to the right (max: 07). The cancel the Pan

setting and restore the normal Pan position (centre), press both [+] and

[-] PAN buttons at the same time.

Note: The programmed TRANSPOSE setting will remain memorized until you turn the instrument off. When you

turn gk360 on again, the instrument will set to the normal Transpose setting (00).

Note: The programmed TUNE setting will remain memorized until you turn the instrument off.

When you turn gk360 on again, the instrument will set to the normal Tune setting (00).

Note: The programmed PAN setting will remain memorized until you turn the instrument off. When you turn gk360

on again, the instrument will set to the normal Pan setting (00)

The percussion function allows to program as PAD the Mem-

ory keys. Through the [+] and [-] keys you can turn the PER-

CUSS function ON so that you can play 6 different drum pad

kits in real time.

The BEAT function allows you to set a time signature (number

of beats in a measure) for the Metronome. The factory set-

ting corresponds to 4 beats for every measure. If you press

either the [+] or [-] button, the display will show the factory

setting (for example, “4”).

The Beat function

Press either the [+] or [-] button repeatedly to scroll to the

required Beat number.

The PERCUS function

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

General Music GK360 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info