6
5. Using the Alarm
How to set the Alarm?
1. Push the key on the remote control: a blinking „A“ should
appear on the display.
2. Select the desired alarm time using the and keys on
the remote control or on the cabinet.
3. Push again the key on the remote control to store the alarm
time; „A“ indicates alarm active.
Note: An alarm can be set only if the clock has been adjusted as
described above in Chapter 1.
The alarm will use the latest mode and setting. If you are in iPod
mode, the alarm will awaken in iPod mode; if in FM it will awaken
to the FM station selected; if neither iPod nor FM are chosen, it
will awaken with a beeping tone.
How to switch the Alarm on and off?
Use the key to activate / deactivate the alarm; „A“ indicates
alarm active.
How to snooze and acknowledge the Alarm?
While the alarm is active, touch anywhere on the TouchLight panel
to snooze the alarm for ten minutes. To acknowledge the alarm
push, any key on the remote control. Without acknowledgement,
the unit will automatically go to stand-by mode after playing for 20
minutes.
6. Troubleshooting, Service and Support
How to change the remote control battery?
1. Open the battery lid of the remote control.
2. Remove the used battery and replace it with a new lithium cell,
3 V battery (CR2025 type).
3. Respect the polarity indication.
Troubleshooting and Support:
1. If the system does not work as expected, rst carefully read this
manual.
2. If the problem persists, you can access our troubleshooting
database available on the web at www.genevalab.com and
select support page.
3. If still not successful, contact our customer support.
Service and Repair:
If the product is damaged and needs repair, please contact Gene-
va Lab by phone or email to be referred to an authorized service
center. For repair under the limited warranty period, see terms
on the web at www.genevalab.com and select support page or
consult your dealer.
Step 1
Step 2 + 3
Customer Service:
see Geneva Lab Website www.genevalab.com and select
support page for your local support number.
7. Made for iPod & Technology Partners
The “Made for iPod and iPhone“ logo indicates that this product has
been designed speci cally to work with iPod and the iPhone.
The manufacturer certi es that this accessory has been made in
accordance with the high standards of quality and performance that
you expect from iPod and Apple.
Technology Partners:
Geneva Lab Corporation uses some of the world’s leading devel-
opers of audio technologies to make the Geneva Sound System a
very advanced product.
“EmbracingSound™ is the technology for consumers and professi-
onals alike to experience sound. As EmbracingSound™ is utilizing
two very closely spaced speakers you will experience what is really
in the recording with better resolution and clarity than ever before.
Just sit back and experience all your music and you will most pro-
bably nd new favorites as well as making excursions in to music
genres that you where totally unfamiliar with before. Just let the
experience guide you!
More details can be found on the www.genevalab.com website.
8. Technical Speci cations
For detailed technical speci cations for this product, please visit
our website (www.genevalab.com) and select support page, where
you can download the detailed technical speci cations for any of
our products.
© 2010 G-Lab GmbH. All rights reserved
Under the copyright laws, this manual may not be copied, in whole
or in part, without the written consent of G-Lab GmbH.
Geneva® is a registered trademark of G-Lab GmbH.
iPod is a trademark of Apple Computer, Inc. registered in the U.S.
and other countries.
The trademark EmbracingSound™ and the Embracing Sound Expe-
rience logo are owned by Embracing Sound Experience AB.
Geneva Sound System Model M, User Manual, Version v1.0
