Bedienungsanleitung George Foreman 24002 (Seite 5 von 16) (Englisch)

716527

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

USING YOUR GRILL

Your grill has ve operating modes:

• Basic grilling function

• Simple steak function

• Sear function

• Temperature probe function

• Timer function

CHANGING TEMPERATURE UNITS

You can choose to display the temperature units in ºC (default) or ºF. To change the units, press both u and d buttons rmly

and hold them for three seconds. The grill will beep and the • marker on the display will move to show whether the display is

reading in ºC or ºF.

BASIC GRILLING

Use the basic grilling function for simple grilling, panini, sandwiches, etc.

• Sit the grill on a stable, level, heat-resistant surface, away from cupboards, curtains, etc.

• Slide the drip tray between the two runners underneath the front of your grill (FIG B). Slide the tray all the way in. The

drip tray will collect any fat or juices that run o the plates during cooking.

• Decide whether you want the grill level or tilted —see TILTING/LEVELLING THE GRILL.

1. Plug the grill in. The grill will beep and the red power light will ash slowly.

2. Press the 2 button. If you don’t press the 2 button within 2 minutes, your grill will enter sleep mode and the red power

light will stop ashing. Press the 2 button again to wake your grill.

3. The light above the temperature (t) button will come on and the display will show 175 (default). The default temperature

units are in ºC which can be changed to ºF if desired—see CHANGING TEMPERATURE UNITS.

4. Set the temperature you require using the u and d buttons. The range is from 150ºC to 220ºC in 5º steps (302ºF to

428ºF in 9º steps).

5. While your grill is heating up, the light above the temperature button will light up red, and the gures on the display will

ash. When your grill has reached the selected temperature, the light will turn green, the display will stop ashing and

your grill will beep three times. During cooking, this sequence will be repeated as your grill maintains the temperature.

This is normal.

6. When the selected temperature has been reached place the food onto the grill and close the lid.

7. When you have nished cooking press the 2 button then unplug the grill.

• You can adjust the temperature at any time using the u and d buttons.

• Check that the food is cooked. If you’re in any doubt, cook it a bit more.

• Always use an oven glove when opening/closing the grill or placing/removing food.

• Use wooden or plastic tools to prevent damage to the plates.

• The grill hinge is articulated to cope with thick or oddly shaped foods.

• The grill plates should be roughly parallel, to avoid uneven cooking.

• When necessary, use an oven glove and empty the drip tray into a heatproof bowl. Wipe it with kitchen paper then

replace it under the front of the grill.

SIMPLE STEAK FUNCTION

The simple steak function combines your grill’s sear feature with the temperature probe to provide a simple method to cook

great tasting, juicy steaks. You can cook two or more similarly sized steaks at the same time. Insert the probe into one of them.

1. Connect the temperature probe to your grill (FIG D).

2. Press the 2 button.

3. Press the probe (

) button then immediately press the sear (P) button either once, twice or three times depending on

how you want your steak cooked:

• Once for rare (display will show ccc)

• Twice for medium (display will show bbb)

• Three times for well done (display will show aaa)

4. Allow your grill to heat up. While the grill is heating up, insert the temperature probe into the thickest part of the steak.

When it’s ready, the light above the sear button will turn green and your grill will beep three times.

5. Open your grill and carefully lay the steak onto the lower plate.

6. Close your grill.

7. When the steak is cooked, your grill will beep ve times. Open the grill and remove the steak straight away otherwise it

will continue cooking and may become overcooked.

8. To cancel the function at any time, press the 2 button.

9. You can repeat the simple steak function four times one after the other but if you try to use it more than this the display

will show “EAA “ (ERRor). Press the 2 button and allow your grill to cool for 10 minutes before using the function again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

George Foreman 24002 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info