Bedienungsanleitung Gerlach GL 6412 (Seite 4 von 116) (Alle Sprachen)

797674

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

17. !!WARNING!! The device emits hot steam under pressure. There is a high chance of

burning. Please make sure to use protective gloves or wooden utensils when handling

the device and when opening the device.

DESCRIPTION OF THE APPLIANCE:

DEVICE (1A)

1. Handle 2. Pressure limiting Valve 3. Float Valve 4. Lid

5. Inner Pot 6. Heating Element 7. Control Panel 8. Plastic base

9. Body 10. Carrying handles 11. Middle layer

Control Panel (2B)

1. Corn 2. Soup 3. Stew

4. Meat 5. Reservation 6. Fry

7. Rice 8. Porridge 9. Waterless Bake

10. Keep pressure

11. Function:

A. Fish

B. Bean

C. Chicken

D. Cake

E. Vegetable

F. Seafood

12. Taste 13. + / - 14. Warm / Cancel

15. Display

Preparing the Device:

1. Opening the lid: Hold the handle (1) firmly, turn the lid (4) clockwise until it loosens and lift vertically. the lid (2).

2. Remove the inner pot (5) and add desired ingredients. The amount of water and food should not exceed 2/3 of the height of the inner

Pot (5). For food that will expand in water, the level should not exceed 1/2 of the Inner Pot (5).

3. Be certain the inner receptacle, where the Electronic Heater is located, is clean and dry before inserting the Inner Pot (5) into the

pressure cooker and adjust the pot left and right to ensure optimal contact between the Inner Pot and the Heating Element (6).

4.Closing the Lid: Make sure the Rubber Seal Ring is fitted properly onto the metal ring inside the lid.

5. Close the lid (2). Hold the handle (1) and turn it Counter-Clockwise to the “LOCKED” position. (A clamping sound can be heard)

6. Check the pressure limiting valve (2) and the float valve (3). The valve should be in the down position.

It will stay in that position until pressure is reached inside the inner pot during work.

7. Plug in the Power cord into the hole positioned in the Plastic base (8) of the device.

8. Plug the power cord into the mains.

9. The device will emit a Beep sound tone, all lights will turn on for a second and then turn off. The device will then go into standby mode

and show “0000” on the display (15).

Device Operation:

1. Press the desired function button (1-11).

2. After choosing the desired program the default time will be shown on display and it will start flashing. You can change that by

pressing the – and + (14) buttons.

You can press “Cancel” to stop the program at any time.

Reservation: The button can be used with combination with any of the menu programs. It is designed to delay the start of the chosen

program the starting time is 30 minutes. The program will start after 30 minutes has passed. The maximum time is 24 hours. It

advances in 30 minute steps.

00:30, 01:00, 01:30… etc.

Keep warm: In standby mode press the “Keep warm / Cancel” ( 13) button. The function will start and the display (15) will show “bb”. The

keep warm temperature is 65C-75C. Press the button again to finish the function and revert to standby. This function will also

activate automatically after finishing each of the programs.

Cancel / Stop program / Stop cooking: During any of the programs you can press the “Keep warm / Cancel” (13) button to abort any

program in progress.

Finishing cooking:

After the device finishes work on the program it will give off a sound signal. Then it will turn on the “Keep Warm” program.

Press the Cancel / Keep warm (13) button to return the device will enter Standby mode.

The lid is locked by the pressure lock.

To open the lid first turn the “Pressure limiting valve” (2) to the right. !!! CAUTION !!! this will start releasing pressure and steam. If not

handled with care you can burn yourself !!!

Please keep the “Pressure limiting valve” in the “Open” position until the “Float valve” drops down.

You will hear a *click* and then you will be able to open the lid.

MENU BUTTONS:

1.“Corn”: First place the ingredients into the Inner pot (5) then close the lid (4) and turn the pressure limiting valve (2) into Closed

position. The device starts work after 5 seconds. After finishing the countdown the device goes into Keep warm mode.

2.“Soup”: First put water into the Inner pot (5) then close the lid (4) and turn the pressure limiting valve (2) into Closed position. Let the

water boil. The device will indicate when the water is boiling by a sound tone. Open the lid. Add the pasta and boil for a time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gerlach GL 6412 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info