779133
58
Zoom out
Zoom in
Vorherige Seite
1/288
Nächste Seite
CycleSafety
34
3.5 Notes on torques
WARNING
Material fatigue due to tightening screw joints incorrectly.
Risk of accident and injury!
xDo not use the cycle if you find loose screw joints.
xScrew joints must be properly tightened with a torque wrench.
xScrew joints must be tightened using the correct torques.
xIf two different torques are indicated for two connected com-
ponents which affect the same point of connection, always ob-
serve the lower of the two values.
To correctly tighten the screw joints, the applicable torques must be observed. This re-
quires a torque wrench with an appropriate adjustment range.
xIf you have no experience with using torque wrenches or do not own a suitable torque
wrench, have the screw joints checked by your dealer.
The correct torque for a screw joint is dependent on the material and diameter of the
screw, as well as the material and design of the component.
xIf you tighten screw joints yourself, check whether your cycle is equipped with alumin-
ium or carbon components (see the specifications data sheet provided by the dealer).
xObserve the specific torques for aluminium or carbon components.
xIndividual components on the cycle are labelled with torque specifications or insertion
depth markings. It is essential that you follow these specifications and markings. If
two different torques are indicated for two connected components, always observe
the lower of the two values. Also read the operating instructions for the components,
if applicable.
Not all components are listed in the following table. The torque specifications are basic
values and do not apply to carbon components.
You can find torque specifications that are tuned to the additional components can be
found on the components. Also read the instructions delivered with the components, if
applicable. Ask your dealer about any missing torque specifications.
The following torque specifications can usually be found as specifications on the compo-
nents or in the accompanying component instructions.
58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ghost Bikes 2020 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Ghost Bikes 2020

Ghost Bikes 2020 Bedienungsanleitung - Deutsch - 287 seiten

Ghost Bikes 2020 Bedienungsanleitung - Holländisch - 286 seiten

Ghost Bikes 2020 Bedienungsanleitung - Französisch - 294 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info