Bedienungsanleitung Ghost Bikes NIVOLET TOUR DISC (Seite 25 von 57) (Englisch)

623700

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

7.6 Inspecting the spring fork

1. Apply the front wheel brake and keep the brake applied.

2. Press with your body weight onto the handlebars so that the spring fork is compressed and release the

pressure on the handlebars immediately.

3. The fork must move evenly up and down.

4. No cracking or grinding noises should be heard.

5. Grip the front wheel between your legs and try to pull up the bike by the handlebars. The standing tubes

must not be released from the fork tubes or from the crown.

6. See also the corresponding instructions in the separate user manual for your suspension fork.

7.7 Inspecting the rear wheel suspension

1. Sit on the bike and alternately compress and relieve the suspension by short up- and down movements.

2. The rear end of the bike must move evenly up and down.

3. No cracking or grinding noises should be heard.

4. See also the instructions in the separate user manual for your suspension fork.

7.8 Inspecting the brakes

DANGER Danger from serious falls

Failing brakes always lead to dangerous riding situations, falls and accidents. A brake malfunction is a

serious danger to safety.

• Pay particular attention when checking your brake system.

• Under no circumstances should you continue using your bike if it has any defects. Contact your specialist

workshop immediately if you discover any defects.

NOTE:

During prolonged tours over several days the brake disc and brake pads can become severely worn.

•

You should plan tours lasting several days in such a way that you can have any necessary servicing work

carried out at specialist workshops.

•

As a precaution you should carry brake linings for your brakes with you. If you do this you will avoid having

to break off your tour if the specialist workshop does not have your type of brake linings in stock.

7.8.1 Checking general functions

How to check the function of your braking system:

1. Pull on both brake levers completely with the bike at a standstill. The smallest distance between the

brake lever and handlebar grip must be at least 10 mm.

2. Try to push the bike with both brakes applied. Both wheels must remain locked.

7.8.2 Checking the hydraulic disc brake

WARNING Danger from falls and accidents

Oil and grease on the brake discs can reduce the braking effect and lead to dangerous riding situations,

falls and accidents.

• Soiled brake discs must be cleaned immediately, see section 14.2, How to clean and care for your bike.

1. Carry out a visual inspection of the screw connections of the entire braking system. All screws must be

tight.

2. Pull the brake calliper alternately in all directions with your hands. The brake calliper must not move.

3. Pull the respective brake lever with the bike at a standstill and hold the brake lever in this position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ghost Bikes NIVOLET TOUR DISC Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ghost Bikes NIVOLET TOUR DISC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info