Bedienungsanleitung Ghost Bikes POWERKID 20 (Seite 30 von 57) (Englisch)

623707

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Stabilisers can be mounted on the following models:

• POWERKID 12"

• POWERKID 16"

1. Check their attachment.

2. Try to move training wheels by hand. You should not be able to do so

7.15 Checking other points

1. Carry out a general visual inspection of your bike. There must not be any protruding sharp-edged or

pointed parts.

8. Adjusting and Operating the Bike

WARNING Danger from falls and accidents

If work is not carried out professionally on your bike, this may endanger its safety and result in dangerous

situations during riding, as well as falls and accidents.

• You should only carry out the adjustment work described.

• Make these adjustments only if you have the necessary tools and manual skills.

• Under no circumstances should you carry out any other adjustments.

NOTE:

In the following sections the adjustments for the standard equipment of all GHOST bikes are described. Some sec-

tions only apply if your bike has the listed equipment. This can be found in section 4, Design and Function. If you

have any questions, please contact your specialist bicycle dealer. He or she will be pleased to advise you.

8.1 Adjusting the saddle height

WARNING Danger from falls and accidents

With children, and particularly those who do not yet have a complete command of bike riding, adjustment

of the saddle too high can lead to dangerous riding situations, falls, accidents and material damage.

• Adjust the saddle height such that the child can touch the ground with both feet when sitting on the sad-

dle.

NOTE:

A description of how to operate the saddle post clamping can be found in sections 8.6.3, Opening and closing the

quick-release axle on the saddle post clamping and 8.6.5, Opening and closing the screw-nut clamping on saddle

posts.

1. Loosen the clamping of the saddle post.

2. Move the saddle with saddle post to the desired position.

3. Clamp the saddle post securely in position.

8.2 Adjusting the spring fork

8.2.1 Forks with air suspension

8.2.1.1 Adjusting the air pressure

NOTE:

Your suspension fork has air suspension. You can adjust the springing behaviour by means of the air pressure. For

the adjustment you need a special suspension fork pump. The use of other pumps may damage your suspension

fork.

• You can purchase a suspension fork pump that is suitable for your bike from your bicycle dealer. If you do

not have such a pump, have your suspension adjusted by your specialist dealer.

1. The correct air pressure for your total weight can be found either on the imprint on your fork, the en-

closed user information or by contacting your dealer.

2. Screw the head of the suspension fork pump on to the connection of your suspension fork. Position of

the connection: See the user information of the suspension fork manufacturer.

3. Continue pumping until you have reached the prescribed air pressure.

4. Unscrew the pump head.

NOTE:

Unscrew the pump head quickly in order to keep the amount of air escaping (which can be heard as hissing)

as small as possible.

8.2.1.2 Switching the suspension on and off

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ghost Bikes POWERKID 20 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ghost Bikes POWERKID 20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info