Bedienungsanleitung Ghost Bikes SL AMR X (Seite 20 von 57) (Englisch)

623681

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

5. Frame Sets

WARNING Danger from falls and accidents

Mistakes during the assembly of your bike and the use of unsuitable attachments can result in serious

falls!

Several GHOST bike frames can be purchased individually and also structured according to your individual

wishes. Anyone constructing a bike frame into a complete bike is deemed to be the manufacturer and is li-

able for any assembly errors or defects.

• THE FIRM GHOST ONLY AUTHORISES THE MOUNTING OF ITS FRAMES BY ITS AUTHORISED SPECIALIST

RETAILERS.

• This manual does not represent assembly instructions for converting your frame set into a complete

bike.

• The only parts which may be used for constructing a frame are those whose type and dimensions are the

same as the parts used for the bicycle range.

• You should select your components only together with your specialist dealer. He or she knows which

parts are suitable for your frame.

6. Before Using for the First Time

WARNING Danger from serious falls and accidents

Your bike is pre-assembled before being shipped to your dealer. Some of the safety-relevant parts are not

yet sufficiently mounted or adjusted. The final assembly of your bike has to be carried out by your special-

ist bicycle dealer, i.e. it has to be made safe to ride.

• Please make sure that your specialist bicycle dealer has completely filled in the “Inspection Checklist for

the Handover” in the delivery certificate for your bike.

• You should only ride your bike if the sitting position is correct for you.

• Have your dealer adjust the correct saddle height and position for you.

• Ask your specialist bicycle dealer to explain to you the technology included in your bike.

• Protect your bike with spray wax. See section 14.2, How to clean and care for your bike.

7. Before Every Use

WARNING Danger from falls and accidents

A bike that is not completely ready for safe operation can lead to dangerous riding situations, falls and ac-

cidents.

• Before you ride your bike you should ensure every time that it is safe to operate.

You should also consider the possibility that your bike may have fallen over when it was not supervised or

that strangers may have tampered with it.

• Memorise the correct condition of your bike when new so that you can later more easily recognise any

deviations from the correct condition.

NOTE:

Photographs you take yourself can be helpful in this.

• Contact your dealer immediately if the inspection reveals faults of any kind. You may correct small de-

fects yourself if the appropriate measures are described below.

• You should contact your specialist bicycle dealer immediately if the measures for rectifying the defect

are not described, you cannot perform them yourself or if these measures do not correct the problems.

• You should only use your bike again when it has been made safe to operate.

1. Perform a visual check of all fastening screws to ensure that they are all correctly attached.

See section 1.5.3, Technical terms.

2. Carry out a visual inspection of the entire bike for dents, cracks, deep scratches or

other mechanical damage.

3. If you find any defects during the test: contact your specialist bicycle dealer.

NOTE:

In the following sections the tests for the standard equipment of all GHOST bikes are described. Some sections

only apply if your bike has the listed equipment. This can be found in the section on “Design and Function”. If

you are not sure which tests apply to your model of bike, please contact your specialist dealer. He or she will be

pleased to advise you.

If your bike has been converted or retrofitted with other parts, new or other tests may be required. Please refer to

the instructions in the corresponding user information or contact

your dealer. He or she will be pleased to advise you.

7.1 Inspecting the wheels

NOTE:

Inspect the front and rear wheels.

A wheel consists of:

• Hub

• Only on the rear wheel hub: Geared ring/pinion or sprocket assembly/sprocket set, often called the cas-

sette

• Brake disc (disc brake system only)

• Spokes

• Rim

• tyres (see following field)

Currently there are three types of tyres:

• Wire or folding tyres:

This is the most commonly used type of tyre and consists of

– Tyre

– Inner tube and

– tube protector (only for rims with holes for spokes)

In the tyre there is a wire or bead ring which upon being pumped up is suspended in the rim flange.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ghost Bikes SL AMR X Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ghost Bikes SL AMR X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info