3.It takes 3 hours to fully charge your battery with a traveler charger for the rst time. On
a deskstand, it takes 6-8 hours to fully charge your battery for the rst time. Unplug the
device from the charger when charging is complete, and you may now use the device.
4.When the right bottom corner of the navigation key lights up, it means the battery is
charging.
5.When the right bottom corner of the navigation key darkens, it means the charging is
complete.
6.The battery icon on task bar on Today screen shows the battery status. You may also
check the battery status in “ Start ” >
【
Settings
】
> System Tab > Battery Tab.
Note: When the device is not charged for a long period of time, or the battery power
has been completely used up, the charging process will enter a pre-charge mode which
takes around 30 minutes. During pre-charge, you will not be able to turn on the device.
Use the stylus to touch or write on your screen. Using stylus can avoid damaging your
screen. There are 2 ways to use your stylus:
1.Tap: softly tap on a desired item by your stylus, and lift the pen from the screen.
2.Press: touch and hold your stylus on a desired item for a few seconds until a blue
dotted circle appears. This indicates that a pop up Menu is going to be activated.
When using the device for the rst time, screen alignment is required. If you nd that the
device does not accurately respond to your stylus taps, or you have performed a system
reset, you need to align your screen.
1.Tap ” Start ” >
【
Settings
】
> System Tab >
【
Screen
】
> General Tab.
2.Tap { Align Screen } on your screen.
3.On the align screen, use your stylus to touch the crosses on the screen accurately.
4.Tap “ OK ” to exit.
You can also choose your screen display in Portrait or Landscape.
1.Press and hold OK any time when the device is on to switch your screen display between
