Bedienungsanleitung Gigapan EPIC EPIC100 (Seite 19 von 39) (Englisch)

444583

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

Using the GigaPan EPIC

Start Delay - Enables a timer delay before each panorama capture begins.

Multiple Shutter (EPIC 100 only) - This option allows you to take multiple pictures at

each position during the capture of your panorama. You can take up to 9 pictures at each

position. (see Chapter 3.4 for more information)

Factory Reset – This option will reset certain options to their default values. The Time Per

Pic, Pic Ordering, Shutter Method, Button Hold and vertical eld of view will be reset.

Expert Options - These options will not be used as often by most users, so they are placed

in a submenu.

Button Hold – This option may be set to Normal or Short. If Short is selected, the duration

of time that the shutter button is depressed is reduced.

Check List – If this option is set to ON, a checklist of things that need to be done in order

to successfully create a technically good image are presented to the user before the

panorama is taken.

Shutter Method – This option allows you to choose how the unit will operate your

camera’s shutter. The settings are Button Pusher, Remote Port and Manual. Button

Pusher is the normal, default method. If the Manual method is used, the user must

manually actuate the shutter and press the OK button on the EPIC to advance to the

next photograph. Remote Port is available for the EPIC 100 only, see Chapter 3.4 for more

information.

Pic Ordering – This option allows you to specify the general order for taking photographs

in your panorama. The settings are column, row–down, and row–up. If the column setting

is chosen, the EPIC will photograph the panorama one column at a time starting from the

left side. The EPIC will travel from the top of a column downwards taking photographs.

When the EPIC reaches the bottom of the panorama, it will move to the next column and

start from the top. If the row–down setting is chosen, the EPIC will take the panorama as a

set of rows. The EPIC will start at the top row and photograph from left to right. When the

EPIC reaches the right side it will move downwards to the next row. If the row–up setting is

chosen the EPIC will shoot rows from the left side of the bottom row and move upwards to

the next row until it has photographed all of the rows in the panorama.

Motors On - This option allows you to turn the stepper motors o so that you can move

the arm and EPIC about while it is powered on.

Backlight Mode - This setting allows you to choose when the back light is in use. The

options are Power Save, Always O, Always On.

Firmware Ver – This will display the version number of the rmware for the EPIC.

GigaPan Setup – This option will allow you to change the vertical eld of view when you

change cameras or lenses. See “Align your camera to the GigaPan EPIC” in Chapter 2.6 for

details on determining the eld of view.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigapan EPIC EPIC100 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info