Bedienungsanleitung Gigaset A230A (Seite 6 von 16) (Englisch, Polnisch)

556048

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Lombok A130/AL130A/A230/AL230A / Großbritannien / A31008-M2412-L101-1-7619 / Lombok.fm / 11.08.2014

Version 4, 16.09.2005

Setting the date and time

Set the date and time so that the correct date and time can be assigned to incoming

calls, and so that the alarm can be used.

MENU ¤ u Settings ¤ OK ¤ Date/Time ¤ OK ¤ Date ¤ ~ (enter the day,

month and year in 6-digit format)

¤ OK ¤ Time ¤ ~ (enter hours and minutes in 4-

digit format)

¤ OK (display message: Saved)

¤ a (press and hold to return to idle status)

When entering the time and date, you can move the position of an entry to the left or

right by pressing the control key

u up or down.

Please note

◆ The handset is pre-registered with the base. If you have purchased a

model with multiple handsets, all handsets will already be registered

with the base. You do not need to register the handset again. The internal

handset number appears in the top left of the display, e.g.

1 (¢ page 1).

However, if a handset is not registered with the base (Register HS or Put

into base

is displayed), please register the handset manually

(¢ page 10).

◆ If you have purchased multiple devices, you can upgrade your Gigaset to

a cordless PABX by registering

all A130/A230 handsets at the same base

(¢ page 10).

◆ After the first battery charge and discharge, you may place your handset

in the charger after every call.

◆ Always repeat the charging and discharging procedure if you remove the

batteries from the handset and reinsert them.

◆ The batteries may warm up during charging. This is not dangerous.

◆ After a while, the charge capacity of the batteries will decrease for techni-

cal reasons.

Activating/deactivating the handset

Press and hold the a key to activate or deactivate the handset. If you place a deacti-

vated handset in the base station or charging cradle, it will automatically activate after

approx. 30 seconds.

If you remove the handset from the base station/charging cradle, the display turns off

briefly.

Making calls

Making external calls and ending calls

External calls are calls using the public telephone network.

(Enter the phone number) ¤ b.

The phone number is dialled. (Or you can first press and hold talk key b [until you

your the dial tone] and then enter the number.) During the call you can adjust the ear

piece volume using t and set the volume with u.

End the call/cancel dialling: Press the end call key a.

You can automatically insert a network provider dialling code before any phone num-

ber (¢ page 7).

Accepting a call

Press the talk key b to accept the call.

When Auto Answer is activated (see menu overview ¢ page 16), simply remove the

handset from the base station/charging cradle.

Please note

If your phone receives the date and time during calling line display (e.g., via your

network provider, a router or PABXs), you can specify whether this data should be

copied to your phone:

¤ Press the key sequence: MENU ¤

P#Q5#MI

The following is displayed;

the current setting flashes:

¤ Press one of the following keys to specify, when this data should be copied to

your phone:

Q Never

1 Once, in case the date/time is not set on your phone

2 Always

Your selection is displayed (e.g. 2 for "Always"):

¤ Press the display key OK.

973 SET:

[

]

973 SET:

[2]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigaset A230A Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gigaset A230A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info