Bedienungsanleitung Gigaset A230A (Seite 12 von 16) (Englisch, Polnisch)

556048

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Lombok A130/AL130A/A230/AL230A / Großbritannien / A31008-M2412-L101-1-7619 / Lombok.fm / 11.08.2014

Version 4, 16.09.2005

Resetting the base via the menu

Handsets are still registered, the system PIN is not reset.

MENU ¤ u Settings ¤ OK ¤ u Base ¤ OK ¤ u Base Reset ¤ OK ¤ Reset?

¤ OK

Resetting the base using the key on the base

All handsets are de-registered and the system PIN is reset to the original code 0000.

Carry out the following steps: Remove the mains cable from the base. Hold down the

registration/paging key on the base (¢ page 1)(¢ page 2) and reconnect the

power cable to the base at the same time. Hold the key down for at least 5 seconds.

Operating the base station on the PABX/router

Operating on the router

When operating the Gigaset on an analogue port of a router you can reduce problems

with

echoes by activating the Echo mode (¢ page 16). If you have no problems with

echoes, this function should be deactivated.

Operating on the PABX

The following settings are only necessary when your PABX requires them; see the user

guide for your PABX.

When entering the digits, enter them slowly one after the other.

Changing the dialling mode

MENU ¤

P#Q5#1N

¤ The number for the set dialling mode flashes:

0 = touch tone dialling (DTMF); 1 = dial pulsing (DP) ¤ enter number ¤ OK.

Setting recall

MENU ¤

P#Q5#1Q

¤ The number for the current recall flashes:

= 80 ms; 1 = 100 ms; 2 = 120 ms; 3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms;

= 800 ms ¤ enter number ¤ OK.

Changing pause after line seizure

You can set the length of the pause inserted between pressing the talk key and

sending the phone number.

MENU ¤

P#Q5#1L

¤ The number for the current pause length flashes:

1 = 1 sec.; 2 = 3 sec.; 3 = 7

sec. ¤ enter number ¤ OK.

Changing the pause after the recall key

MENU ¤

P#Q5#12

¤ The number for the current pause length flashes:

1 = 800 ms; 2 = 1600 ms; 3

= 3200 ms ¤ enter number ¤ OK.

Appendix

Entering letters/characters

Specifications

Batteries

Technology: Nickel-metal-hydride (NiMH); Size: AAA (Micro, HR03); Voltage: 1.2 V;

Capacity: 400 - 1000 mAh

General specifications

Standard

characters

Press the relevant key

the number of times

indicated.

Briefly press the hash

key

# to switch from

"Abc" to "123" mode,

from "123" to "abc"

mode and from "abc"

to "Abc" mode.

1) Space

1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x

1£$¥¤

abc2äáàâãç

def 3ëéèê

gh i4ïíìî

jkl5

mno6öñóòôõ

pqr s7ß

tuv8üúùû

wxy z9 ÿ ýæøå

.,?!0+-:¿¡"’;_

*/()<=>%

#@\ &§

DECT standard is supported

GAP standard is supported

Range up to 300 m outdoors, up to 50 m indoors

Base station power supply 230 V ~/50 Hz

Environmental conditions

operation

+5 °C to +45 °C, 20% to 75% relative humidity

Base station power consumption A130/A230 AL130A/AL230A

In standby mode

– Handset in base station

– Handset outside base station

ca. 1.0 W ca. 1.2 W

ca. 0.8 W ca. 1.0 W

During a call ca. 1.0 W ca. 1.2 W

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigaset A230A Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gigaset A230A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info