Bedienungsanleitung Gigaset A590 (Seite 16 von 22) (Englisch)

580061

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Gigaset A590 / SEA / A31008-M2045-Y701-2-7619 / main.fm / 26.05.2010

Deleting the complete phone book

(open phone book)

¢press and hold Ô ¢Ì (confirm action)

¤ To cancel the delete action press Ó before press-

ing

Ì.

Using several handsets

Registering handsets

Before you can use your handset, you must register it

to the base station. You can register up to four hand

sets. You must initiate handset registration on the

handset and on the base station.

On the base

¤ Press and hold the paging key Ëfor at least 5

sec.

On the handset

f(open menu)¢ADVANCED SET ¢|

¢REGISTRATION¢|

(enter current PIN, default: 0000) ¢|

The handset is assigned the lowest unassigned inter-

nal number (1–4).

Once the handset has been registered successfully, it

returns to idle mode. The name (default: Gigaset) and

the handset’s internal number is shown in the display,

e.g.

Gigaset 1.

If the handset was not registered successfully, the dis-

play will show PLS REG H/S. In this case repeat the pro-

cedure.

Deregistering handsets

Precondition: the handset is in idle mode.

f(open menu)¢ADVANCED SET ¢|

¢UNREGISTER¢|

(enter current PIN)¢|

¢p (select handset to be deregistered) ¢|

A long confirmation tone indicates the successful

deregistration. The handset display will show

PLS REG H/S.

Locating a handset ("paging")

You can locate the handsets using the base station.

Precondition: base station is in idle mode.

¤ Briefly press the paging keyË on the base sta-

tion.

All handsets will ring using a specific paging melody.

This also applies if the ringer tones are deactivated.

The displays will show

INTERCOM X .

In case of an incoming call, the handset quits the pag-

ing mode and then rings.

After 30 seconds handset and base station go back to

idle mode.

Ending paging manually

¤ Briefly press the paging key Ëon the base sta-

tion again.

Making internal calls

Internal calls are free calls to other handsets that are

registered to the same base station or to the base sta

tion itself.

Making internal calls (handset)

Calling another internal participant

k¢

(enter internal number of participant)

0 = base station, 1-4 = handset number, * = all

If only 1 handset is registered you need not enter a

number to call the handset from the base.

Accepting internal call

¤ To answer the call press c.

¤ To end the call, press a.

Incoming call during internal call

An incoming call is indicated by an acoustic signal.

c (answer external call, end internal call) or

k (hold internal call, accept external call)

Press and hold k(start conference)

Internal consultation calls

When you are speaking to an external participant,

you can call an internal participant at the same time

for consultation.

Press and hold k (put external call on hold)

k¢

(enter internal number of participant)

You are connected with the internal participant.

k (toggle between internal and external partici-

pant)

Please note

◆ The default system PIN may have been

changed,

(¢ page 19).

◆ The handset name can be changed,

(¢ page 18).

Please note

Do not deregister handsets unless necessary!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigaset A590 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info