580076

Gigaset AL410A Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Gigaset AL410A_UK _ A31008-M2237-L151-1-7619
Pack contents
If you have purchased a
model with multiple
handsets the package should
contain two batteries, a
battery cover, a charging
cradle 8 with mains adapter
9 for each additional
handset.
1
1 one Gigaset AL410A Base station
2 one mains adapter
3 one Gigaset AL410 handset
4 one phone cord
2
3
4
5
7
6
5 two batteries
6 one battery cover
7 this Quick start guide
89
Connecting the base station
¤ Connect power adapter 1
and Phone jack 2 to the
base and place the cable
recesses.
Please ensure the power
lead is fully inserted.
Please note:
u The mains adapter must always be connected, as the Phone will not
operate without a mains connection.
u Always use the power adapter and Phone cord supplied. Pin
connections on Telephone cables can vary.
Connecting the charging cradle (if included)
1
1
1
2
¤ Plug the mains adapter into the
plug socket 2.
¤ Connect the flat plug from the
mains adapter 1.
If you need to disconnect the plug from the
charging cradle, press the release button 3 and
disconnect the plug 4.
1
2
4
3
Frequently asked questions
Q: There is no dial tone.
A: Press call button for 2 seconds (long press) to obtain dial tone.
A short press opens the redial list.
Q: The line is crackling / not clear.
A: Have you used the new line cable provided? Please do not use an old cable.
Q: The display is not clear / seems to be broken.
A: The display is protected by a plastic film, please make sure you have removed
the protective film.
Q: The handset is not registered.
A: If your handset is not registered, please follow the Registration handset proce-
dure.
(see user manual)
Q: The caller ID is not working.
A: Have you subscribed to this service (CLIP) from your provider?
Q: Message indicator flashing and I cannot retrieve my message.
A: Message indicator will flash to indicate missed calls as well as new messages
of text messages. (see user manual)
Please check:
Have you used the phone cord supplied ¨
Have you fully inserted the power cable into the base station ¨
Have you inserted the batteries correctly ¨
Have you charged the battery for 9.5 hours ¨
Have you set up the Date/Time ¨
To download the latest manuals, visit our web-site: http://www.gigaset.com
You have questions? As a Gigaset customer, you can take advantage of our comprehensive
service offerings. You can find help quickly in this User Manual and in the service pages of
our Gigaset online portal: http://www.gigaset.com
Product may not be fully compatible with the national telephone network. It is clearly
specified on the box near the CE mark for which country/countries the equipment has been
developed. If the equipment is used in a manner inconsistent with this advice or with the
instructions of the manual and on the product itself, this may have implications on the
conditions for warranty or guarantee claims (repair or exchange of product).
In order to make use of the warranty, the product purchaser is asked to submit a receipt
which proves the date of purchase (date from which the warranty period starts) and the
type of goods that have been purchased.
If you have problems setting up or operation this product please call
GIGASET UK HELPLINE 084503 18190
GIGASET IRL HELPLINE 0818 200 033
Preparing the handset
Initial charging and discharging of the batteries
¤ Insert the batteries the right way round. The
polarity is indicated
in/on the battery compartment.
¤ Then slide the battery cover back into the
main casing until it clicks into place.
If you need to open the battery cover,
for instance to replace the batteries,
place your fingertip in the grooved area
on the top of the cover and slide down.
The correct charge status can only be displayed if the
batteries are first fully charged and discharged.
¤ Place the handset in the charger
for 6 hours.
Then remove the handset from the charger,
make and receive Phone calls, setup the Phone
etc. and do not put it on the charger until the
batteries are fully discharged.
6 h
Setting the date and time
Set the date and time so that the correct date and time can be assigned to
incoming calls, and so that the alarm can be used.
Þ
MENU
¤ Press the key below MENU on the
display screen to open the main
menu.
¤ Press the key below OK on the display
screen to confirm your selection.
The
Date/Time menu item appears on the
display.
¤ Press the key below OK on the display
screen to open the input field.
ç
Settings
”U
OK
¤ The active cursor position is flashing.
Enter day, month and year as an
6-digit number via the handset,
e.g. 150912 for
15.09.2012.
¤ Press the key below OK on the display
screen to confirm your setting.
Date/Time
”U
OK
Date 15.09.12
”
OK
¤ Press the bottom of the control
key ...
... until the
Settings menu item
appears.
Setting the date and time
Message indication
Message Indication Key ‘ on handset will flash to indicate one or all of the
following events:
u missed calls (if caller ID is enabled for your line numbers will be shown)
u new messages on the answer machine
To retrieve your messages, just press the flashing ‘ key on your handset.
Display in idle status
The strength of the reception signal between base and handset:
– Good to poor:
© ¨ § ¦
– No reception:
¥
Charge status of the batteries:
– ¤ Batteries charged to over 66 %
– £ Batteries charged to between 34 % and 66 %
– ¢ Batteries charged to between 11 % and 33 %
– ¡ Flashes: batteries charged to below 11 %
– Ÿ ¡ Ÿ ¢ Ÿ £ Ÿ ¤ Charging
If Eco Mode+ is activated, the ½ icon is displayed in the top left corner of the
display.
Time 16:09
”
OK
¤ The active cursor position is flashing.
Enter hours and minutes in 4-digit
format, e.g. 1609 for 16:09.
¤ Press the key below OK on the display
screen to confirm your setting.
¤ Press and hold a to return to idle
status.
©
±
£
INT 1
11.12. 11:56
Þ Menu
Registration handset
You can register up to four handsets to your base. You can also register other
Gigaset handsets and handsets from other devices with GAP functionality.
Your handset should already be registered by default. Nevertheless, if your
handset is flashing Put into base you have to register your handset.
If your handset is flashing Base then it can be that:
u Your base station is not switched on, please check if the power supply is
connected properly.
u There is too much distance between the handset and base.
Automatic registering procedure
In the case the automatic registering procedure failed or you want to
register an additional handset, use the manual registration procedure.
Manual registration procedure
1. On the handset:
MENU ¤ Settings ¤ OK ¤ Handset ¤ OK ¤ Register HS ¤ OK ¤ enter the system
PIN for the base and press
OK. Default PIN = 0000
2. On the base station:
Within 60 seconds of entering the system PIN, press and hold the
registration/paging key (min. 3 seconds). Registration takes approx.
1 minute.
Place the handset
with the display
facing up in the base
station.
£
Put into base
Þ Menu
Registering
The handset registers
automatically.
Registration can take
up to 5 minutes.
Do not remove the handset from
the base station during this time.
AL410A
Congratulations
By purchasing a Gigaset, you have chosen a brand
that is fully committed
to sustainability. This product’s packaging
is eco-friendly!
To learn more, visit www.gigaset.com.
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

gigaset-al410a

Suche zurücksetzen

  • Welche Taste muss ich drücken um zu sehen, von welcher Telefonnummer ich zuletzt angerufen wurde? Eingereicht am 27-5-2019 12:45

    Antworten Frage melden

  • Welche Taste muss ich drücken, wenn ich herausfinden möchte, wer mein letzter Anrufer war. Eingereicht am 23-4-2018 12:29

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gigaset AL410A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info