Bedienungsanleitung Gigaset C350 (Seite 33 von 55) (Englisch)

580351

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

Using several handsets

Gigaset C350 / GBR / A31008-M1621-L161-1-7619 / registration.fm / 19.1.05

Changing a handset's

internal number

A handset is automatically allocated the

lowest available number when it is regis-

tered. If all of the numbers have been allo-

cated, then number 6 is overwritten if this

handset is in idle status. You can change

the internal number of all registered hand-

sets (1–6).

INT Open list of internal users.

s Select handset.

§Menu§ Press the control key.

s Select Edit Handset Number.

~ Enter a number.

§OK§ Press the control key.

a Press and hold (idle status).

You will hear the error tone if an internal

number has been allocated twice.

¤ Repeat the process with an available

number.

Using a handset as a

room monitor

With this function, a previously stored

internal or external number is called when

a set noise level in the room is reached.

The room monitor call to an external

number stops after approx. 90 seconds.

The room monitor call to an internal

number (handset) stops after approx. 3

minutes (depending on the base).

During the call, all keys are locked except

the end call key. The room monitor

function remains active after you end the

call. It must be activated again if the hand-

set has been switched off.

When the room monitor function is active,

incoming calls to the handset are indi-

cated without a ring tone and only

appear on the display. The display and

keys are not illuminated and advisory

tones are also turned off.

Activating the room monitor and

entering the number to be called

§Menu§ ¢ Additional Features ¢ Room

Monitor

¢ Call Internal

s Select an internal handset or

Call All handsets (if several

handsets are registered and

you wish all handsets to be

called) and press

§OK§.

The function is now activated. An internal

handset will be called.

Or:

§Menu§ ¢ Additional Features ¢ Room

Monitor

¢ Call External

~ Enter the number of an exter-

nal phone and press

§OK§.

The function is now activated. An exter-

nal number will be called.

Setting the sensitivity

§Menu§ ¢ Additional Features ¢ Room

Monitor

¢ Level

s Choose between Low and High

and press

§OK§.

Note:

– The connection to which the room monitor

is diverted must not be blocked by an acti-

vated answering machine.

– Ideally the handset should be positioned 1

to 2 metres away from the baby. The micro-

phone must be directed towards the baby.

– You should always check the operation

of the room monitor before use. For

example, test its sensitivity. Check the

connection if you are diverting the room

monitor to an outside number.

– If you answer an incoming call this will

interrupt the room monitor.

– The active room monitor function consider-

ably reduces the operating time of the

handset. Place the handset in the base if

necessary. This ensures that the battery

does not discharge.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigaset C350 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gigaset C350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info