74
Web configurator – configuring the phone on a PC
Gigaset DE310 IP PRO / en / A31008-M2218-L101-5-7619 / web_configurator.fm / 27.09.2012
PRO Version 3, 30.05.2012
Send Settings for DTMF Transmission
To send DTMF signals via VoIP, you must define how the key codes are to be converted to
DTMF signals and sent:
Ask your VoIP provider which type of DTMF transmission it supports.
¤
Click on Next >.
Personal provider data
In both cases of manual configuration, with and without a provider profile, you now enter the
personal registration data that you have received from your VoIP provider.
¤
Enter the following data:
– Authentication Name
– Authentication Password
–Username
– Display Name
You can also enter a name of your choice for this phone connection. This is advisable if you
use multiple VoIP accounts.
¤
Enter a Connection Name.
¤
Click on Next > to finish configuring the VoIP account.
Completing configuration
The data for the configured VoIP account is displayed.
¤
To change the settings, click on < Back.
¤
If you want to configure another VoIP account, check the relevant box. In this case, the
Web configurator will return to the start screen when you press Next >
(
¢
Configuring a VoIP account).
¤
Click on Finish to end the setup assistant.
¤
Click on Next > to configure another VoIP account.
Closing the assistant
You have now successfully configured your phone using the Web configurator. The following
data is displayed once again:
– The number of VoIP accounts configured
– The name of the default account for outgoing calls
¤
Click on Finish to close the assistant and apply the settings.
¤
Click on < Back if you want to make changes to your settings.
Audio As audible information in the voice channel, i.e., it is not known which key
has been pressed.
RFC 2833 As a value (= key pressed) in an RTP packet.
SIP Info As an "SIP Info" message.
The value (= key pressed) is sent as an SIP data packet.
