Bedienungsanleitung Gigaset DX800A PRO all in one (Seite 123 von 177) (Englisch)

617246

123

Zoom out

Zoom in

Vorherige Seite

1/177

Nächste Seite

121

Configuring the system settings

Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 06.09.11

Version 4, 16.09.2005

The Gigaset.net connection is not included

in the selection for the send connections.

Gigaset.net numbers (suffix #9) are automat-

ically dialled via Gigaset.net.

Assigning receive connections

Prerequisite: Several connections are con-

figured for your base.

Settings

¢ Telephony

¢ Receive Connections

A list of the internal parties (base, handsets,

local answering machines, device con-

nected to the FAX port INT8 – where applica-

ble) is displayed.

q Select the internal parties that

should be assigned new receive

connections and press the dis-

play key

§OK§.

A list of all configured connections and the

Gigaset.net connection is opened. You can

select Ye s or No for each connection.

r Select Ye s if you want the rele-

vant connection to be the

receive connection for the inter-

nal party.Select No if it should

not be the receive connection.

s Change to the next connection.

¤ Repeat these two steps for each connec-

tion.

¤ Press the display key §Save§ to save the

changes.

Further information on how to assign

receive connections to local answering

machines can be found on page 82.

Please note

If the send connection for an internal

party is deleted or deactivated, then

depending on the connection, that party

is assigned the fixed line connection in

the configuration as the send connec-

tion.

Making calls via Bluetooth GSM

connection

If you wish to make a call from the base via

the GSM connection of a mobile connected

to the phone via Bluetooth, you must select

either the GSM connection or Select at each

call as the send connection.

For the GSM connection, the name of the

mobile that is currently/was last connected

to the base is displayed in the list of known

devices. When selecting the send connec-

tion, the name of the currently connected

mobile is displayed.

The same applies if you wish to establish

GSM connections via a handset registered to

the base.

Please note

u If a new connection is configured, it is

assigned as the receive connection to

all internal parties and answering

machine 1.

u If a connection is not assigned as the

receive connection to any internal

party, calls on this connection will not

be signalled.

Accepting calls to a Bluetooth GSM

connection

If you wish to accept calls on the base that

are made to the GSM connection of a mobile

connected to that base via Bluetooth, then

you must select the GSM connection as the

receive connection. The name of the mobile

is displayed for the GSM connection in the

list of known devices.

The same applies if you wish to accept calls

via the GSM connection to a handset regis-

tered on the base.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigaset DX800A PRO all in one Seite 123

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gigaset DX800A PRO all in one

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info