Bedienungsanleitung Gigaset E380 A Care (Seite 118 von 145) (Englisch)

795252

118

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

Template Go, Version 1, 01.07.2014,

Questions and answers

Gigaset E380A Care / LUG CH en / A31008-N2535-R102-1-4U19 / FAQs.fm / 1/10/20

118

The caller's number is not displayed.

•Calling Line Identification (CLI) is not enabled for the caller. The caller should ask the network provider

to enable Calling Line Identification (CLI).

•Calling Line Identification Presentation (CLIP) is not supported or enabled by the network provider.

Ask the network provider to enable Caller Line Identification Presentation (CLIP).

•The telephone is connected via a PABX or a router with an integrated PABX (gateway) that does not

transmit all information.

¥Reset the system: Briefly pull out the power plug. Reinsert the plug and wait until the device restarts.

¥Check the settings on the PABX and activate phone number display, if necessary. To do this, search for

terms such as CLIP, calling line identification, telephone number identification, caller ID, ... in the

system user guide or ask the system manufacturer.

You hear an error tone when keying in (descending tone sequence).

•Action has failed/invalid input. Repeat the process. Read the display and refer to the user guide if neces-

sary.

You cannot listen to messages on the network mailbox.

•Your PABX is set to pulse dialling. Set your PABX to tone dialling.

No time is specified for a message in the call list.

•Date/time are not set. Set the date/time.

Internet telephony not possible.

•No IP account has been set up: Register the phone with your provider for Internet telephony

•Display shows Provider error registration failed: Registration of the phone with your provider for Internet

telephony has failed. Repeat the process. Check registration status in Web configurator if necessary.

•Display shows No IP connection: No IP account configured or the IP connections have been deactivated

No connection to the Internet.

•Display shows No LAN connection: Check cable connection between router and base.

•Display shows IP address not available: Check IP configuration.

The phone is preconfigured for dynamic assignment of the IP address. In order for your router to

"recognise" the phone, dynamic IP address assignment must also be activated on the router, i. e. the

router's DHCP server must be activated.

If the router's DHCP server cannot be/is not activated: Assign a fixed IP address to the phone.

•Display shows Check IP settings: The telephone is not connected to the Internet.

¥Check the cable connections between the base station and router and between the router and the

Internet.

¥Check the telephone's connection with the LAN, check whether the phone can be contacted at its IP

address. Check the IP address on the handset.

•Display shows Internet connection not available:

Connection to the Internet has been interrupted: Please try again later

Otherwise: Check the plug connection between the router and modem or DSL connection and the

router settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigaset E380 A Care Seite 118

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gigaset E380 A Care

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info