Bedienungsanleitung Gigaset E630 A GO (Seite 98 von 137) (Englisch)

647790

Zoom out

Zoom in

Vorherige Seite

1/137

Nächste Seite

Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0

Web configurator

Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17

Network

IP Configuration

Connect phone to local network (LAN)/router.

¤ Settings Network IP Configuration

In most cases, special settings are not required to connect the phone to the router/a local

twork. Your phone is preconfigured for dynamic assignment of the IP address by default

(DHCP). In order for your router to "recognise" the phone, dynamic IP address assignment must

also be activated on the router, i. e. the router's DHCP server must be activated.

If the DHCP server cannot or should not be activated, you must assign a fixed/static IP address

o the phone. A fixed IP address is useful, for example, if port forwarding or a DMZ is set up on

the

router for the phone.

You can use the web configurator to make further settings that are required if you connect your

pho

ne to a large (company-wide or organisation-wide) network, or if you want to manage the

phone remotely.

• VLAN identifier / VLAN priority Store for access to a tagged VLAN.

• Allow PCs outside your LAN to connect to the web configurator.

Security

The phone supports the establishment of secure data connections on the Internet with the TLS

security protocol (Transport Layer Security). With TLS, the client (the phone) uses certificates to

identify the server. These certificates must be stored on the base.

¤ Settings Network Security

On this page, you will find the S

erver certificates / CA certificates lists with the certificates saved

on the base.

The I

nvalid certificates list contains the certificates received from servers that have not passed

the certificate check when establishing a connection, and certificates from the Server

certificates / CA certificates lists that have become invalid (e. g. because they have expired).

You can remove certificates and download new certi

ficates to the base, and you can also accept

or reject invalid certificates.

If the connection to a data server on the Internet is not made because the phone does not accept

the

certificate received from the server (e. g. when downloading your e-mail messages from the

POP3 server), you will be prompted to open the Security settings web page.

The I

nvalid certificates list contains the certificate used to make the connection. Click on

[Details] to display information about who issued the certificate (certification authority) and for

whom, as well as its validity period.

Authorising access from other networks increases the risk of unauthorised access. It

is therefore recommended that you disable remote access if you no longer require it.

The web configurator can only be accessed from other networks if your router passes

on the service requests from "outside" to port 80 (the default port) of the phone.

Make sure you read the user guide for your router.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigaset E630 A GO Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gigaset E630 A GO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info