Bedienungsanleitung Gigaset E630 A GO (Seite 102 von 137) (Englisch)

647790

102

Zoom out

Zoom in

Vorherige Seite

1/137

Nächste Seite

100

Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0

Web configurator

Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17

User-defined dialling plans

You can define your own dialling plans on the web page:

¤ Settings Telephony Dialling Plans

You can specify the following dialling plans:

• Specify a connection for phone numbers (Fixed line, Gigaset.net or IP1 - IP6), which should

always be used to dial these phone numbers and therefore also for billing.

If you enter just a few digits (e. g. local area, national or mobile network code) any call to a

number beginning with these digits will be made via the selected connection.

• If you block phone numbers, your phone will not establish a connection to these numbers

(e. g. 0190 or 0900 numbers).

These dialling plans apply to all registered handsets

. The send connection settings are inactive

when you dial numbers that are governed by a dialling plan.

You can activate and deactivate the dialling plans as required.

Emergency numbers

Dialling plans for emergency numbers (e. g. the local p

olice emergency number) are preset for

certain countries. The fixed line network is set as the Connection.

You should only change these dialling plans if the phone is not connected to the fixed line

twork. If you choose an IP connection, please make sure the provider supports calls to

emergency numbers. If the VoIP connection is deleted from the configuration, the emergency

call can no longer be made.

Access codes – dialling plans when connecting to a PABX

If your phone is connected to a PABX, you may have to enter an access code for external calls

(outside line code, e. g. "0").

Save one access code each for fixed line networ

k and VoIP calls and specify when the phone

numbers should be automatically prefixed with the digits.

These settings are available in the Ac

cess Code area on the web page:

¤ Settings Telephony Dialling Plans

Local area codes – dialling plans for local calls using VoIP

If you use VoIP to make a call to the fixed line network, you may also have to dial the area code

for local calls (depending on the provider). You can avoid having to enter your own local area

code by entering the full area code (with the international code) for the location where you are

using the phone in the phone configuration and activating the Predial area code for local calls

via VoIP option.

These settings are available in the Ar

ea Codes area on the web page:

¤ Settings Management Local Settings

Dialling plans, with the exception of a block, are not effective if you have assigned the

line selection to a display key on the handset and you explicitly choose a send

connection from the list of available connections before dialling.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigaset E630 A GO Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gigaset E630 A GO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info