Bedienungsanleitung Gigaset N720 DECT IP Multicell (Seite 14 von 55) (Englisch)

580039

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

Projecting the DECT network

Gigaset N720 DECT IP Multicell System / engbt / A31008-M2316-L101-2-7619 / preparation.fm / 10.02.2012

Version 2, 06.08.2010

Synchronisation planning

Base stations that combine to form a DECT wireless network must synchronise with one

another to ensure a smooth transition of the handsets from cell to cell (handover). No

handover is possible between cells that are not synchronised.

They are synchronised via what is known as an air interface, i.e. via the DECT wireless net-

work. This means that the signal strength between neighbouring base stations must be

sufficient for synchronisation. The guide value is a minimum of –70 dBm, but this can also

be influenced by environmental conditions. For further information on this, please also

refer to the Defining limit values section

£ page 21.

The synchronisation takes place in a master/slave procedure. This means that one base

station (master) defines the synchronisation cycle for one or more other base stations

(slaves). Since it is generally the case that not all base stations have a good enough con-

nection to all other base stations in a multi-cell DECT network, it is not possible to have

only one master station and to configure all others as slaves. Instead, you have to set up a

synchronisation hierarchy. You can configure this hierarchy using the Web user interface

of the Gigaset N720 DM PRO DECT Manager.

During configuration, assign one level in the synchronisation hierarchy (sync level) to

each base station. Sync level 1 is the highest level; it appears only once in each cluster.

A base station always synchronises itself with a base station that has a better sync level. If

it sees several base stations with a better sync level, it synchronises itself with the base sta-

tion that has the strongest signal. If it does not see any base station with a higher sync

level, it cannot synchronise. A Gigaset N720 IP PRO base station shows its synchronisation

status with an LED.

For information on synchronising base stations, please refer to the user guide for the

Gigaset N720 IP PRO and Gigaset N720 DM PRO.

Please note

Synchronisation always refers to a cluster. You can set up several clusters that are not

synchronised with one another, so there is no possibility of a handover between clus-

ters.

Please note

We recommend giving the base stations a name during planning and entering the

name in the plan. The name should define the unique location in the building. It is also

helpful to document the assignment of the names to the MAC addresses of the

devices.

This makes the configuration of the synchronisation hierarchy in the Web user inter-

face and the assignment to the installed devices easier later on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigaset N720 DECT IP Multicell Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gigaset N720 DECT IP Multicell

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info