Bedienungsanleitung Gigaset Pro N870E IP PRO (Seite 19 von 142) (Englisch)

795395

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XX / starting.fm / 8/10/21

Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020

First steps

Mounting the device

•When installing the base stations, please take into account the technical conditions for posi-

tioning and the installation guidelines, which are described in the "N870 IP PRO - Site Plan-

ning and Measurement Guide".

•Install the base stations at the positions you determined when planning or measuring your

DECT wireless network.

•The N870 IP PRO device acting as Integrator/DECT manager can be installed anywhere

within the range of the local network. It does not need to be installed in the coverage area of

the DECT wireless network. Exception: the device comprising the DECT manager also acts as

base station.

•The N870 IP PRO devices are intended for wall mounting (p. 23).

8 Register the base stations at the DECT manager

Note: The base stations will go offline for the duration of firmware update.

Further configuration of base stations (step 9) could be done via the Inte-

grator Web-UI (and database). But the base stations cannot learn new

settings, until they have finished their offline status in case of a firmware

update.

p. 45

9 Configure the base station synchronization p. 49

10 Configure VoIP or provider p. 64

11 Register handsets and perform handset configuration

All the handsets to be used for making calls over the N870 IP PRO must be

registered at the telephone system. Any handset must get assigned an

individual SIP account at the SIP. When registering, the handset is perma-

nently assigned a VoIP connection as the receive and send connection.

p. 71

Create a backup to save your configuration p. 104

If you want to migrate from a small or medium configuration with one single DECT

manager to a multiple DECT manager system, please read the "Migration" chapter

first (p. 115).

Whenever there are new or improved functions for your Gigaset device, firmware

updates are made available for you to download to your DECT managers and your

base stations. If this results in operational changes when using your phone, a new

version of this user guide or the necessary amendments will be published on the

Internet at

wiki.gigasetpro.com

Select the product to open the relevant product page for your device, where you will

find a link to the user guides.

To find out which version of the Integrator/DECT manager firmware is currently

loaded, see p. 102 and/or p. 108.

For useful information on DECT radio coverage and the resulting optimum installa-

tion please refer to the "N870 IP PRO - Site Planning and Measurement Guide".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gigaset Pro N870E IP PRO Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gigaset Pro N870E IP PRO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info