795395
48
Zoom out
Zoom in
Vorherige Seite
1/142
Nächste Seite
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Base stations
Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XX / settings_basestations.fm / 8/10/21
48
Status
Synchronization status of the base station:
IP address
Current IP address of the Base station.
RFPI = PARI + RPN (hex)
(RFPI = Radio Fixed Part Identity) unique name of the base station in a multicell DECT network.
It consists of:
PARI (Primary Access Rights Identity): unique system ID of a base station
RPN (Radio Fixed Part Number): base station number within the DECT network
The two most significant bits in the RPN represent the RPN group of the DECT manager.
Current firmware version
Firmware version currently installed.
Sync Level
Base station synchronisation level.
The following data can be edited
Name / Location
This name should make it easier to assign the base station within the logical and spatial structure
of the DECT network.
In the text field enter a descriptive name or description for the base station.
Value: max. 32 characters
IP address type
The IP address type is copied from the setting for the DECT manager on the NetworkIP/LAN
page ( p. 33). You can change the IP address type. The settings for the DECT manager and the
base stations do not have to match. For example, the DECT manager could receive a fixed IP
address so that it will always be able to access the web configurator with the same address, while
the base stations receive their IP addresses dynamically.
Select the desired IP address type from the option menu.
If the IP address type is Static, you have to enter the IP address.
IP address
Enter an IP address for the base station.
Offline Not available
Deactivated Available, but not activated
No sync Activated, but not synchronised
Sync Activated and synchronised
Sync overload Synchronised, but DECT overload; attempts were made at this base station
to initiate more than the permitted simultaneous calls.
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gigaset Pro N870E IP PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Gigaset Pro N870E IP PRO

Gigaset Pro N870E IP PRO Bedienungsanleitung - Deutsch - 151 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Holländisch - 150 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Französisch - 151 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info