795395
116
Zoom out
Zoom in
Vorherige Seite
1/142
Nächste Seite
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Using a handset connected to an N870 IP PRO base
Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XX / telephony.fm / 8/10/21
116
Using a handset connected to an N870 IP PRO base
The functions of your N870 IP PRO are available on the registered handsets. The functions of the
telephone system are added to the handset menu. Handset-specific functions, e.g., local direc-
tory or organiser, are not described here. Information about this will be found in the relevant
handset user guide. The availability of functions or their designations may differ on individual
handsets.
Making calls
You can make calls using any handset registered to your N870 IP PRO.
Prerequisite: You are located in the cell of at least one of the base stations registered to the tele-
phone system.
The cells of the base stations together form the DECT wireless network of the telephone system.
You can initiate or answer calls on a handset across the whole wireless network and change cells
during a call (handover).
Prerequisite for handover: The base stations involved must be assigned to the same cluster and
must be synchronised (p. 49).
Each handset is assigned a send and receive connection (p. 75).
If your N870 IP PRO is connected to a PBX that permits the formation of groups, VoIP connections
can also be assigned to groups. In this case, you will also receive calls on your handset that have
been sent to your group number.
The N870 IP PRO uses a VoIP PBX or the services of a VoIP provider for Internet telephony. The
availability of some phone functions depends on whether they are supported by the PBX/
provider and whether they have been enabled. If necessary, you can obtain a description of the
services from the operator of your PBX.
Calling
. . . use to enter a number Briefly press the Talk key
or
Press and hold the Talk key . . . use to enter a number
The connection is established using the SIP connection assigned to the handset (p. 75).
For information about which Gigaset handsets support the complete functionality of
the N870 IP PRO multicell system please refer to wiki.gigasetpro.com.
Depending on the specifications of your PBX, you may need to dial an access code for
calls outside the area covered by your VoIP PBX (p. 82).
If you make a call to the fixed line network, you may also have to dial the area code for
local calls (depending on the PABX/provider). This is not necessary if the area code is
entered in the telephony configuration (p. 83).
116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gigaset Pro N870E IP PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Gigaset Pro N870E IP PRO

Gigaset Pro N870E IP PRO Bedienungsanleitung - Deutsch - 151 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Holländisch - 150 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Französisch - 151 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info