Bedienungsanleitung Gingko Analogue Click Clock (Seite 3 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

747124

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

TIME SETTINGINSTRUCTIONS

The clock will take you through all of these settings in this order and it won’t allow you to skip these settings.

NOTE: If you do not select anything for more than 20 seconds the clock will exit the setting mode and return back to the

regular display mode.

 Press and hold SET button for 3-5 seconds to access the setting mode

 The short hand LEDs representing the hour hand on the front face of the clock will flash. Press + or - to change the

hour (When the 12 dots circle representing the analogue face flashes at the same time this indicates PM

time; to change it to show AM time, just press the + button to scroll up the hour till 12 and the flashing will

stop; when just the hour hand flashes this indicates AM time; to change it to show PM time, repeat the

same operation as before.)

 Press SET to confirm when required hour has been selected, then the longer hand LEDs representing the minute

hand will now flash, press + or - to change the minute. Press set to confirm and exit the setting.

Optional: Press and hold down + when the clock is in regular display mode until a beep will deactivate the second dot

display. To activate the dot display function again, repeat the same operation.

ALARM SETTING INSTRUCTION

The clock arrives with no alarm set as default.

 Press and hold down the alarm button to turn the alarm on.

 Press the alarm button once to enter the settings page

 When the short hand flashes press + or - button to change the hour (when you saw the 12 dots circle

representing the analogue face flashes at the same time this indicates PM alarm time; to change it to show

AM alarm time, just press the + button to scroll up the hour till 12 and it will then stop flashing; when just

saw the hour hand flashes this indicates AM alarm time; to change it to show PM alarm time, repeat the

same operation as .

 Please SET button to confirm when the required alarm hour has been selected, then the longer hand representing

the minute will now flash, press + or - to change the minute. Press set to confirm. Your alarm time is now set.

Pressing the alarm button once when the alarm is in regular display mode will bring up the alarm time that it is set for. A

blank face in the middle of the display screen means that no alarm has been set or the alarm is currently turned off.

When you have already set the alarm and you want to change it, you do not need to press and hold the alarm button.

Just Press once to show the alarm set, and then press it again to enter the alarm settings mode.

To turn off the alarm you have set, just press and hold down the alarm button and the middle of the screen will turn

into blank again. Turn the alarm back on, repeat the same operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gingko Analogue Click Clock Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info