Bedienungsanleitung Gingko Brick click clock (Seite 4 von 13) (Deutsch, Englisch, Französisch)

650721

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

ALARM SETTING INSTRUCITONS

(This clock can be set with 3 different alarms; and each alarm can be set with “normal alarm mode” or “week day alarm mode”)

‘ - - :AL ‘ - Normal alarm mode: the alarm will go off 7 days a week

‘ - : AL ‘ - Week day alarm mode: the alarm will go off on week days only

 Press the DOWN button to access the alarm setting when it’s in normal display and the clock will initially be on showing “- AL” ,

press UP and DOWN to choose the alarm mode you want to set, then press SET to confirm and it will bring you to the first

alarm setting screen

 the first alarm is initially turned off with display '- -:A1' (to turn alarm ON press UP button to show '0:00') To turn OFF press

DOWN button.

 To set the first alarm, press SET when it’s displaying “0:00”, the hour section will flash and then press UP and DOWN buttons to

adjust the hour; press SET again, the minute will flash and press UP and DOWN to adjust minute.

 After adjusting time, press SET again. It will go to the second alarm time, initial display will be ‘- -:A2’ (to turn alarm ON press

UP button to show '0:00') To turn off press DOWN button. Follow the same instructions as above to set your second alarm

time. (If you don’t want to set the second alarm, just continue to press SET button to access the third alarm setting screen.)

 After pressing SET, it will go to the third alarm showing initial display '- -:A3' (to turn alarm ON press UP button to show '0:00').

To turn OFF, press DOWN button. Follow the instructions as above. After finishing setting the three alarms, press SET it will go

back to normal display. (If you don’t want to set the second alarm, just continue to press SET button to exit the alarm settings

and the clock will go back to normal display)

SOUND ACTIVATION FUNCTION & LOCK TIME DISPLAY INSTRUCTION

The sound sensitive function can be turned off so the time can display continuously without going off. But Having this function

turned on will save energy. The clock can also be set to display time only, without alternating between date and temperature.

 To turn sound activation function ON, press the 'V/S' button. When clock displays 'on:Sd' , the sound activation function is ON.

 Press the V/S button again for the clock to display '--:Sd', means this function is turned OFF.

 Press and hold the V/S button for 3 seconds until hearing a “Beep” Sound, the Clock will display Time only. To turn back to a

alternative display of time, date and temperature, press and hold the V/S button until hearing an “Beep” sound.

 The temperature can’t be changed when the clock is at the TIME DISPLAY ONLY setting mode.

SNOOZE FUNCTION INSTRUCITON

 The clock comes with a snooze function. The snooze time is 5 minutes each time and it can be snoozed 5 times.

 The snooze function will be turned on automatically when the clock is turned on.

 When the alarm is on, pressing any button will stop the alarm and it will go off again in 5 minutes.

 Pressing any button twice when the alarm is on can turn off the snooze function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gingko Brick click clock Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gingko Brick click clock

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info