Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-RD-2R/GT-RD-1T
20
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-RD-2R/GT-RD-1T
21
4. With suitable screws (countersunk screws, head
diameter max. 7 mm) fasten the wall bracket for
the transmitter (14).
NOTE:
Note the position of the rubber seal (16) when
attaching the transmitter. In order to achieve a bet-
ter seal on the battery compartment, the rubber
seal can be painted with some silicone lubricant.
5. Push the transmitter onto the wall bracket.
For installation on wood or similar:
1. Maketwohorizontalmarksatadistanceof65mm.
2. Drill approx. 5 mm deep (ø 2 mm) with an impact
drill;
3. With suitable screws (countersunk screws, head
diameter max. 7 mm) fasten the wall bracket for
the transmitter (14).
NOTE:
Note the position of the rubber seal (16) when
attaching the transmitter. In order to achieve a
Startup and installation Startup and installation
better seal on the battery compartment, the rub-
ber seal can be painted with some silicone lubri-
cant.
4. Push the transmitter onto the wall bracket.
Problem solving
Receiver does not respond to transmitter:
• Carryoutprogramming,seeunderProgramme
radio channel.
• Checkthebatteries.
• Transmitterandreceiveraretoofarapartfromone
another.
• Thesignaltransmissionisbeinghindered.Change
the position of the transmitter/receiver.
The right light is permanently illuminated:
• Checkwhetherthebellbuttonisstuck.
• Brieflyremovethebatteriesfromthedeviceand
carry out reprogramming.