Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-RD-2R/GT-RD-1T
18
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-RD-2R/GT-RD-1T
19
NOTE:
For permanent installation of the device, skilled
handling of tools is necessary. If necessary, please
contact an electrical engineer, if you have no tools
orarenotexperiencedinhandlingtools!
Installation of the receiver
For installation on plaster or brickwork:
1. Drill 30 mm deep (ø 5 mm) with an impact drill;
2. Insert wall plugs (S5) in the drill hole;
3. Turn in a suitable screw (head diameter not larger
than 7 mm), such that the head protrudes approx.
5 mm.
4. Suspend receiver.
For installation on wood or similar:
1. Drill approx. 0.5 mm (ø 2 mm) deep using a drill.
2. Turn in a suitable screw (head diameter not larger
than 7 mm), such that the head protrudes approx.
5 mm.
Startup and installation
3. Suspend receiver.
Installation of the transmitter
NOTE:
The wall bracket for the transmitter (14) should
be attached to the wall without a gap, because
water could otherwise penetrate the housing and
damage the electronic parts.
Thetransmittershouldalwaysbeinstalledhorizon-
tally. You can label the transmitter with a name.
The name field (3) is covered with a film. The film
can be removed in the area of the LED function
control (4) (press in with fingernail).
For installation on plaster or brickwork:
1. Maketwohorizontalmarksatadistanceof65mm.
2. Drill 30 mm deep (ø 5 mm) with an impact drill;
3. Insert wall plugs (S5) in the drill hole;
Startup and installation
