Bedienungsanleitung Globe Fire Wiona (Seite 12 von 16) (Englisch)

814089

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

18.

Menu M3-Language

Using this menu you can select a language from the languages available. To go to the

next language press P2 to scroll up and P1 to scroll down. To confirm the chosen

language press the ON/OFF button (P3).

Menu M4- Standby

This menu can be used to activate or switch off the standby mode after selecting it,

using the buttons. It can be switched ON or OFF using P1 and P2.

Menu M5-Alarm tone

This menu can be used to switch the alarm on or off. Press the P1 or P2 button and

confirm with ON/OFF (P3) button.

Menu M6- Filling the first time (filling the auger)

This is only available when the stove is set to OFF. It allows the auger to fill up to start

the stove for the first time. After selecting the M6 menu, 'continue pressing' will appear

in the display. Press P2 to scroll up. The smoke extractor fan (LED 7) is switched on at

maximum speed. The auger is switched on (LED5) and both remain in this setting until

the time given on the display is reached or until the P3 button has been pressed. It is

possible that this setting is needed when the stove tank is completely empty and there

are no more pellets in the auger.

Menu M7 – Stove mode

After selecting the M7 menu by pressing the P3 button, the display will show the status

of some levels when the stove is in operation.

Menu M8- Technical settings (customer service)

This menu is reserved for the stove installer. After filling in the access code various

operational parameters can be installed with the buttons P1 and P2.

Menu M9 - backtrack

After selecting this menu with the P3 button, the menu will close and the settings will

be reset to the previous status.

19.

Operating system for the user

The following is a description of the normal operational settings installed in this pellet

stove.Turning on the stove: First connect the plug to the socket and then fill the pellet

tank. When filling make sure that the bag is not emptied in one go but that the tank is

filled gradually and slowly.

Any burnt remains must be cleared from the fire area and fire grate. The tank lid and

door must be closed. If this is not the case this can lead to the appliance

malfunctioning and eventually setting off an alarm. Press the P3 button for a few

seconds to ignite the stove. This will be shown in the display by 'ON' and by the

ON/OFF Led flashing. This stage takes a little time. The stove will now continue in

the preheating stage , the spiral filament and the smoke extraction fan (LED7) have

been activated. Any breakdowns during the starting up stage are shown in the

display and the stove shows the alarm status.

Filling the stove with pellets:

Filling the stove with pellets begins after approximately one minute. The sign “Fill

pellets will appear in the display and the ON/OFF LED flashes. During the first stage

the auger fills the fire grate with pellets. The smoke extractor fan is working and the

spiral filament is continually activated (LED 6 – ignition is burning). In the second

stage the auger is switched off (LED5- auger off), but the smoke extractor fan and

the igniter remain active. If no ignition takes place during this stage the auger will be

activated again for a certain time. The speed of the smoke extraction fan and the

spiral filament remain active.

Presence of fire:

After the exhaust temperature has reached and passed the settings required, the

system goes into the ignition mode, the sign 'flame on 'appears in the display and the

LED ON/OFF flashes. During this stage the temperature is checked to see if it

remains constant during a certain time. The speed of the smoke extraction fan and

the auger is set , (LED 5 auger is flashing) and the spiral filament is switched off

(LED 6 ignition switched off). Any breakdown will cause the stove to switch off and

the alarm stage will be activated.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Globe Fire Wiona Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Globe Fire Wiona

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info