636444
6
Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
10 11
Installation
After the end of scanning use OK button and then the receiver will display
the rst scanned channel.
Use OK button on remote control to display channel list. Using / but-
tons choose a channel You want to watch and conrm your choice using
OK button.
2.3 First Scan 2.4 Automatic Power Down
2.5 Working with External USB Drive
2.6 Antenna Power Supply
After the conguration, use the blue button or OK on remote control to start
scanning TV and radio channels. It will not happen if your antenna is not con-
nected and properly congured.
In accordance with actual European Union requirements, your receiver is
equipped with function “Automatic Power O”. It works by switching the
receiver into standby mode after a period of 3 hours after the last active use.
In practice this means that if during this time the receiver will not be given
any command by using the remote control or keypad on the front panel,
the receiver turns o. Turning o the receiver will be preceded (2 minutes
previous) by a relevant message on the TV screen. Please also note that this
feature is enabled by default, but at your own request, you can disable it
using the appropriate functions in the receiver menu.
During the selection and operation with USB drive (HDD, ash drive), You
should pay attention to the following issues:
1. Drive is compatible with USB 2.0 and has appropriate write and read speed,
2. Drive contains one single partition, formatted in supported format,
3. If necessary, drive should be supplied from an external power supply
(especially for USB hard drives),
4. Do not disconnect the drive during a write/read data operation,
5. Do not use full or fragmented drive.
plug USB drive in here
If your antenna needs a +5V power supply - use MENU button to enter
the main menu and using / buttons enter Installation menu, select
Channel Scan and set Tuner Power ON and exit using MENU button. Next,
using cursor buttons select Auto Scan to scan all available channels.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Globo OPTICUM HD T90 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info