Bedienungsanleitung GO Swissdrive Evo control unit (Seite 9 von 23) (Englisch)

811662

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

1514

GO SWISSDRIVE

4. OVERVIEW MENU STRUCTURE

The menu structure of your Evo control unit consists of different menus which are

enabled depending on the riding situation.

For road-safety reasons the menu selection is limited during the ride to the main

menu, the tour data and the stopwatch. At standstill further menus are enabled in

which for example settings can be made or a mobile phone can be connected via

Bluetooth.

4.1. Menus in operation during the ride

In the driving mode the display of your Evo control unit is subdivided into ve sec-

tions (1):

- status bar (1a),

- display of the assistance level (1b),

- speed indicator (1c),

- menu position (1d) and

- variable section (1e) indicating the three different rinding menus.

The status bar shows various symbols giving you a quick overview of the current

state of the system. A detailed description of the individual elements is given in the

following chapter “Status bar”.

The currently selected assistance level is visualised by the graphics on the left edge

(2). By means of the +/–keys you can select between ve positive assistance levels

and two recuperation levels. By pressing the +key you select a higher assistance le-

vel, by pressing the –key you select a lower assistance level. By selecting assistance

level 0 the motor assistance is turned off.

The higher the assistance level, the more assistance is provided until you have

reached the end limit of the motor set by the manufacturer. The recuperation (the

feeding back of recovered energy into the battery and the motor brake) is correspon-

dingly strongest at the lowest level (-2).

The current speed of the pedelec/e-bike is indicated with one digit behind the deci-

mal point (3). In the settings you can choose between a display in kilometres per hour

(km/h) or in miles per hour (mph).

I The speed is only indicated correctly if the circumference of tyre of

your pedelec/e-bike is set correctly. You can adjust the circumference

of tyre in the settings (see chapter “Congurations and settings”).

The menu position indicates the selected screen with a symbol.

In the variable section you can select between the main menu, an overview of the

data relating to the current tour and a stop watch function. You can switch between

these menus by pressing the Scroll key (4). A detailed description of these menus

including respective functions is given in the chapters “Main menu”, “Overview tour

data” and “Stopwatch”.

4.2. Menus at standstill

At standstill of the pedelec/e-bike, further menus are enabled:

- an overview of the total data,

- the phone menu,

- the service menu,

- a menu for saving data on external devices and

- the conguration pages.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

GO Swissdrive Evo control unit Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info