Bedienungsanleitung GO Swissdrive Evo control unit (Seite 17 von 23) (Englisch)

811662

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

3130

GO SWISSDRIVE

For the display of the distances and speeds you can select between the metric

system and the imperial system. In the metric system distances are displayed in

kilometres (km) and the speeds in kilometres per hour (km/h); in the imperial system

distances are displayed in miles (m) and speeds in miles per hour (mph).

Your Evo control unit offers various menu languages between which you can select.

The possible options depend on the conguration of the manufacturer of your pedelec/

e-bike. The languages German and English are available as standard.

With the parameter “Power off after min” (1) you can set after how many minutes

without input and movement of your pedelec/e-bike you want the system to switch

off to save energy.

I Make sure the time set is not too short to avoid that the system swit-

ches off unintentionally, e.g. during a rather long stop in front of red

trafc lights. In case the system nevertheless switches off unintentio-

nally, you can enable it with the On/Off key of the handlebar remote or

with any other key at any time.

The Evo control unit has an integrated brightness sensor. This sensor adapts the

display’s backlighting automatically to the ambient brightness. You can increase or

reduce the basic brightness via the parameter “Brightness”. When the parameter is

set to 100% the automatic control is disabled and the backlighting is always at maxi-

mum regardless of the ambient brightness.

i The automatic brightness sensor is not enabled in all variants of the

Evo display. In these variants you can set the display brightness ma-

nually in three steps.

With the parameter “Circumference of tyre” (2) you can enter the circumference

of tyre of your pedelec/e-bike into the system. The unit for the circumference of tyre

is millimetre (mm).

A Keep in mind that the circumference of tyre is the basis for many cal-

culations, such as the indicated speed, the distance you have ridden

and the remaining range. If possible, have this setting done when you

collect your pedelec/e-bike from the dealer.

If you enable the option “Clear tour after 4h autom.” (3), the tour data are deleted

after each standstill longer than four hours. The next time the display is switched on

the tour data will be reset.

In this menu, you can furthermore clear the tour data manually with the button “Clear

tour” at any time.

13.2. Date and time

In the submenu “Date and time” (4) you can set the date and the current time.

Furthermore, you can select between a time indication in the 24-hour mode or in the

12-hour mode. In the 12-hour mode the indication AM (Ante Meridiem) or PM (Post

Meridiem) is displayed in addition on the right side of the time in the status bar.

13.3. Bluetooth

Your Evo control unit has an integrated Bluetooth chip and can be connected via Blu-

etooth 4.0 with various compatible devices, such as for ex. mobile phones. Whether

your mobile phone supports the Bluetooth 4.0 standard can be gathered from the

operating manual of your mobile phone.

To connect a compatible mobile phone you have to enable the Bluetooth interface of

this mobile phone rst. For more details in this regard see the operating manual of

your mobile phone.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

GO Swissdrive Evo control unit Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info