Bedienungsanleitung Godox Speedlite V860II Canon (Seite 15 von 23) (Englisch)

708926

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

MENU2

Slave Unit Setting

Master Unit Setting

1. Wireless Settings

You can switch between normal flash and wireless flash. For normal

flash shooting, be sure to set the wireless setting to OFF.

Press < > button so that < >

or < > are displayed on

the LCD panel.

Press < > button so that < >

or < > are displayed on

the LCD panel.

2. Master Unit’s Flash OFF

When the master unit is set to OFF, only the slave units will fire a

flash.

Press Function Button 4 so

1 that < > is displayed

on the LCD panel.

Press Function Button 1

2 < > to control the

ON/OFF of the master unit.

< >：The master unit flash

firing is ON.

< >：The master unit flash

firing is OFF.

ON/OFF

3. Setting the Communication Channel

If there are other wireless flash systems nearby, you can change the

channel IDs to prevent signal interference. The channel IDs of the

master unit and the slave unit(s) must be set to the same.

Press Function Button 4 so

1 that < > is displayed

on the LCD panel.

Press Function Button 1 so

2 that < > is displayed

on the LCD panel. Turn the

Select Dial to choose a

channel ID from 1 to 4.

Press the <SET> button to

3 confirm.

4. ETTLFully Automatic Wireless Flash Shooting

Using Automatic Wireless Flash with a Single Slave Unit

Master Unit Setting

● Attach a V860IIC camera

flash on the camera and

set it as the master unit.

● As a master unit, V860IIC

can control Canon

speedlites e.g. 580EXII,

600EX-RT via wireless.

MENU3

Wireless Flash Shooting: Optic Transmission

This product supports wireless flash application and functions

as either a master or a slave unit. As a master unit, it can control

Canon speedlites e.g. 580EXII, 600EX-RT via wireless. As a slave

unit, it can receive wireless signals of Canon speedlites e.g.

580EXII, 600EX-RT and commanders of Canon cameras e.g.

7D/60D/600D.

● You can set up two to three slave groups for E-TTL II autoflash

shooting. With E-TTL II autoflash, you can easily create various

lighting effects.

● Any flash settings (of flash exposure compensation, high-speed

sync, FE lock, FEB, manual flash, Multi flash) on the master unit

will be automatically sent to the slave units. So the only thing you

need to do is to set the master unit to ETTL mode without any

operation for the slave units at all during the shooting.

● This flash can work in ETTL autoflash, M manual flash, and Multi

stroboscopic flash modes when set as a master unit.

Positioning and Operation Range

● Even with multiple slave units, the master unit can control

all of them via wireless.

● In this user manual, “master unit” refers to the camera flash

on a camera and “slave unit” will be controlled by the

master unit.

Indoors

Outdoors

15m(49.2ft)

10m(32.8ft)

80°

8m(26.2ft) 12m(39.4ft)

- 67 - - 68 -

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Godox Speedlite V860II Canon Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info