Bedienungsanleitung Godox V350N (Seite 12 von 14) (Englisch)

683875

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Using the Wide Panel

Pull out the wide panel and place it

over the flash head as shown. The

flash coverage will then be extended

to 14 mm.

● The catchlight panel will come out

at the same time. Push the

catchlight panel back in.

Low Battery Warning

If the battery power is low, < > will

appear and blink on the LCD panel.

P l e a s e r ep la ce t he b at te ry

immediately. When the low battery

indicator is displayed, the ZOOM

can not be adjusted.

C.Fn: Setting Custom Functions

The following table lists the available and unavailable custom

functions of this flash.

10 sec.

OFF

01-99

Auto sleep

(standby)

AF-assist beam

Backlighting

control

Wireless ID

C.Fn Custom Functions

Custom Function

Signs

Function

Setting No. Settings & Description

OFF

Off in 10 sec.

Always off

Always lighting

Off

Choose any figure from 01-99

1. Press the < ZOOM > Button for 2 seconds until C.Fn menu is

displayed.

2. Turn the Select Dial to select the Custom Functions.

3. Press the <SET> Button and the Setting No. blinks.

4. Turn the Select Dial to set the desired number. Pressing the

<SET> Button will confirm the settings.

5. Press the <ZOOM> Button to exit.

Protection Function

1. Over-Temperature Protection

● To avoid overheating and deteriorating the flash head, do not fire

more than 30 continuous flashes in fast succession at 1/1 full

power. After 30 continuous flashes, allow a rest time of at least 10

minutes.

● If you fire more than 30 continuous flashes and then fire more

flashes in short intervals, the inner over-temperature protection

function may be activated and make the recycling time over 10

seconds. If this occurs, allow a rest time of about 10 minutes, and

the flash unit will then return to normal.

● When the over-temperature protection is started, is shown on

the LCD display.

Number of flashes that will activate over-temperature protection:

Number of flashes that will activate over-temperature protection in

high-speed sync triggering mode:

Power Output Level

1/1

1/2 +0.7

1/2 +0.3

1/2

1/4(+0.3,+0.7)

1/8(+0.3,+0.7)

1/16(+0.3,+0.7)

1/32(+0.3,+0.7)

1/64(+0.3,+0.7)

1/128(+0.3,+0.7)

Number of Flashes

100

200

300

500

1000

Power Output

1/1

1/2(+0.3,+0.7);

1/4(+0.3,+0.7)

1/8(+0.3,+0.7);

1/16(+0.3,+0.7)

Times

Meaning

A failure occurs on the recycling system so that the

flash cannot fire.

Please restart the flash unit. If the problem still exists,

please send this product to a maintenance center.

The voltage on two outlets of the flash tube is too high.

Please send this product to a maintenance center.

There are some errors occurred during the upgrading

process. Please using the correct firmware upgrade

method.

Prompts on LCD Panel

2. Other Protections

The system provides real-time protection to secure the device and

your safety. The following lists prompts for your reference:

● When pull out the wide panel, the ZOOM will constantly be

14mm. The <ZOOM> button will not work.

- 47 -

- 48 -

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Godox V350N Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info