Bedienungsanleitung Godox V850 (Seite 7 von 8) (Englisch)

656034

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

- 12 -- 11 -

beam and buzzer, as well as trigger the flash.

To control the flash wirelessly, you need a Godox FT

series remote control set (on-camera and on-flash). Insert its

receive end into the Wireless Control Port (6) on the flash

and insert the transmit end into the camera hot shoe.

Settings made on the hotshoe-mounted transmit and receive

ends will be wirelessly communicated to the flash. Then you can press thecamera

shutter-release button to trigger the flash. Youcan also hold the transmit end at hand

to control your off-camera flash.

 When the flash unit receives wireless signals, is shown on the LCD display.

 For full instructions on the use of FT series remotecontrol, see its user manual.

12. Sync Triggering

The Sync Cord Jack (7) is a Φ2.5mm plug. Insert a trigger plug here and the flash

will be fired synchronously with the camera shutter.

13. Custom Function----Sleep Function

This product is equipped with Sleep Function to avoid battery drain when the flash

unit is idle.

Press <  > button and hold for 2 seconds to enter the Sleep Function Mode.

The LCD panel displays “SL” (Sleep) and “Sleeping Time”. Idle time before entering

Sleep Mode is 10 minutes by default. Rotate Select Dial (14) to set a desired time for

the flash or to turn off Sleep Function. Press < > button to return.

ZOOM

When the flash enters sleep mode, the LCD panel displays a “”icon.

To wake up the flash unit, press any button on the flash unit, or press the camera

release button, or press the trigger TEST button.

Note:The idle time before entering Sleep Mode is recommended to set short. This can ensure

a longer battery life.

Protection Function

with all shutter speeds of cameras (max. 1/8000 second, up to your camera). This is

convenient when you want to use aperture priority for fill-flash portraits.

Note:

* Hi-speed sync triggering mode is effective only when the flash unit is used together with hi-

speed sync trigger, e.g., Godox Cells II transceiver.

* Hi-speed sync triggering mode is not available when the flash unit is mounted onto the camera

hotshoe.

Number of flashes that will activate over-temperature protection in high-speed

sync triggering mode:

To avoid overheating or deteriorating the flash head during high speed sync flash, the

over-temperature protection function will be activated automatically after 15 continuous

high-speed flashes and the recycle time becomes 10 seconds longer.

9.Custom Function-----Focus Assist Lamp

Under poorly-lit or low-contrast conditions, you can press <> button (18) to

turn on the focus assist beam in order to make it easier to autofocus.

The beam will automatically get out certain seconds after the last pop is fired. The

time between the last fire and the auto shutdown of focus assist beam is called No-

Flash Time. The time is user adjustable and set to 10 seconds by default.

Press < > button and hold for 2 seconds to enter Custom Function. Then

press “SET” button to enter “FC” mode. The LCD panel displays “FC”(Auto shutdown

of focus assist lamp) and “No-Flash Time”. Rotate Select Dial (14) to set a desired

time for the flash. Press <  > button to return.

10. Buzz Function

To turn the buzz function on or off, press <> button (13) and hold for 2 seconds.

When the buzzer is turned on, is shown on the LCD display.

11. Wireless Control Function

The flash unit is built in with a Wireless Control Port (6) so that you can wirelessly

adjust the power level of the flash and control the on-or-off of your flash, focus assist

1. Over-Temperature Protection

To avoid overheating and deteriorating the flash head, do not fire more than 30

continuous flashes in fast succession at 1/1 full power. After 30 continuous flashes,

allow a rest time of at least 10 minutes.

Idle Time

Meaning

Sleep Function is turned off. The flash unit will not automatically enter sleep mode.

Idle time before entering Sleep Mode is set to 3 minutes.

Idle time before entering Sleep Mode is set to 10 minutes.

Idle time before entering Sleep Mode is set to 30 minutes.

Idle time before entering Sleep Mode is set to 60 minutes.

ZOOM

No-Flash Time

10 seconds

20 seconds

30 seconds

Meaning

10 seconds after the last fire, focus assist lamp will automatically get out.

20 seconds after the last fire, focus assist lamp will automatically get out.

30 seconds after the last fire, focus assist lamp will automatically get out.

ZOOM

Power Output

1/1

1/2(+0.3,+0.7)

1/4(+0.3,+0.7)

1/8(+0.3,+0.7)

Times

Power Output

1/16(+0.3,+0.7)

1/32(+0.3,+0.7)

1/64(+0.3,+0.7)

1/128(+0.3,+0.7)

Times

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Godox V850 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info