Bedienungsanleitung Golden interstar Golden Media Uni-box STB (Seite 11 von 41) (Englisch)

505300

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

8. Basic Operations

8.1 Turn on STB

First, press the [Device’s Main Power] to turn on the unit.

When the STB is first used, there will play the first

channel from the default Channel List. If the STB is not

first used, STB will play the same channel as last time

before turning off.

Frequently Asked Question

Q: The power of my STB has been turned on and not

in Standby mode, but the TV screen showed

nothing:

A: Make sure the TV set has been set to the correct

video input (not the TV channels). For example, if you

have connected the unit with the Video1 input of the TV

set, the TV set has to be switched to Video1.

Q: The power of my STB has been turn on and not in

Standby mode, but the TV screen showed

nothing except one box with “No Signal” image.

A: That means the channel, which you select, is no

signal. It could be several causes:

1 The channel which you select is not in your

allocate satellite. The simply solution is to change

channel.

2 The signal of current TV channel is too weak. You

can try to change channel to other strong signal

channels. If the problems still exist, please consult

your local dealer or other professionals for

technical service.

3 You use the Dual LNB, and you need Modify LNB

Type

8.2 Power

1 Press [Power] Key can enter the Standby state

2 In Standby state, press [Power] Key again can call

back the unit and go on play the previous channel

3 User can also disconnect the device’s main power

to end the Standby state.

8.3 Channel Up/Channel Down

In full screen, press [CH+/CH-] to change channel.

8.4 Volume Up/Volume Down-

In full screen, press [VOL+/VOL-] to adjust volume.

8.5 Number

In full screen, use number key and press [OK] on the

Remote Control Unit to change channel.

8.6 Mute

1 Press [MUTE] key to mute the sound and the

screen will show up mute OSD.

2 Press [MUTE] key again to restore sound.

8.7 Pause

1 In playing mode, press [Pause] key, the picture will

be paused, but the sound of the channel will still

continues.

2 Press [PLAY] key again, the screen’s picture will

skip over to the current playing picture, and the

sound of the channel will corresponding playing.

8.8 Recall

Press [RETURN] key will directly switch to the previous

channel that you played before current channel.

8.9 Favorite

1 In full screen, press [FAV] key, it will display a

window of “Favorite list” on the left of the screen,

which you can watch like below.

2 In the window of " Favorite list ", you can move

highlight by press [Channel Up/Channel Down]

key to select favorite Channels.

3 In the window of ” Favorite list ", you can press

[Left/Right] key to select favorite groups Pressing

[P-/P+] keys can implement the “Page up/Page

down” function

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Golden interstar Golden Media Uni-box STB Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info