Bedienungsanleitung Golmar 5403 Stadio Plus - T3403ML (Seite 19 von 56) (Englisch)

467816

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

120

DOOR PANEL PROGRAMMING

ccess control menu.

3rd code on

07:15

3rd code off

14:55

07:15

modify value

10:13

3rd code on

O.K.

Proceed as described on "1st code" to modify

the fourth code. When this code is used

to activate the lock release, the system sends

an alert message to the porter's exchange

(if exists).

panic code

:5555

O.K.

Defines the starting time from which

it's possible to activate the lock release

by entering the third code.

To set this time press : the display will show

the message modify value. Key in

the hour value from 0 to 23 and minutes

value from 0 to 59 and confirm by pressing

. If is pressed the former value

will be restored.

For a proper operation of this function,

the system clock must be correctly adjusted,

as described on page 116.

Coming from previous page

Continue

Defines the closing time from which

it's possible to activate the lock release

by entering the third code.

To set this time proceed as described on the

previous menu.

In case that starting and closing times have

equal values, the third code will be enabled

all the time.

End of the access control menu. Use "UP" arrow key to move to the previous options.

Press to exit from the access control menu and return to the main menu.

If is pressed twice the panel will exit from the programming menu.

DOOR PANEL PROGRAMMING

121

repertory:new

enter address

O.K.

:000

O.K.

04300

enter direct cod

:000000

O.K.

enter name

setting recorded

repertory

O.K.

epertory menu.

NOTE: to make a call it will not be necessary to enter the zero placed on the left side

of the call code. For instance, if the call code is 000100, it will be enough to

enter 100 to make the call.

Coming from previous page

Continue

To enter into repertory menu, follow

the steps described on page 114

and press when the display shows the

message repertory.

Allows to enter a new entry in the last repertory

position. To choose a specific position,

use the repertory:insert menu.

Press to proceed: the display will show

the message enter address; key in the

monitor code and confirm by pressing .

If the panel has been configurated as general

entrance door panel, a six digits code must

be entered: the three first digits will match the

internal building code and the three last

digits will match the monitor code.

If the panel has not been configurated as

general entrance door panel, a three digits

code will be required, that will match the

monitor code.

IMPORTANT: if "Direct Call Code" function

has been enabled (page 116), the display

will show the message enter direct cod;

enter the six digits code that will be used

to call to this apartment.

Press to validate it.

To assign a text to this entry press and

proceed as described on page 124.

Once the new entry has been recorded

the display will show the message

settings recorded, and will return

to the initial screen. Repeat this procedure

to add as much entries as it is needed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Golmar 5403 Stadio Plus - T3403ML Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Golmar 5403 Stadio Plus - T3403ML

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info