Bedienungsanleitung Golmar Plateau Plus (Seite 9 von 18) (Englisch)

44115

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

On-Off push button. After any monitor reset and during the next 45 seconds,

all the monitor functions will be disabled, with the exception of call reception.

If the handset is on the craddle allows the activation of an optional second camera (*).

If not, allows to make an intercom call or to activate the second camera (*).

If the handset is on the craddle allows the activation of an optional device. If not,

allows to call to a slave porter's exchange (*) or to activate the optional device.

If the handset is on the craddle allows to see the picture from the master door panel.

If not, allows to establish audio and video communication with the door panel

that has been configurated with the autoswitch-on function. This function is

disabled if a communication is already established.

If the handset is on the craddle sends a panic call to the porter's exchanges that

have enabled the reception of this type of call. If not, allows to call to the master

porter's exchange. During call reception and communication progresses allows

the lock release activation.

Monitor

Modelo

CODIGO / CODE

MASTER

18Vdc ± 2V

Standby 15mA

Máximo 450mA

Sistemas de comunicación S.A.

Made in Spain

10ºC + 50ºC

SLAVE

INTER A1

PUERTAESCALERA

ATENCIÓN

Alta tensión. No abrir la tapa.

Manipular sólo por personal

del servicio técnico.

WARNING

High voltage. Don't open cover.

Handle only by technical service.

PISO

Floor DoorStair

PLATEA Plus

0000000000

Nº serie

f .

i .

j .

l .

Handset.

B/W or color screen (depending on the model).

Front film.

Function push buttons.

Cord.

Attachment holes.

Identification label.

Connecting points.

CN4 connector.

Three positions call reception volume control.

Cable slot.

Contrast control (color control in case of color screen).

Brightness control.

Monitor

Modelo

CODIGO / CODE

MASTER

18Vdc ± 2V

Standby 15mA

Máximo 450mA

Sistemas de comunicación S.A.

Made in Spain

10ºC + 50ºC

SLAVE

INTER A1

PUERTAESCALERA

ATENCIÓN

Alta tensión. No abrir la tapa.

Manipular sólo por personal

del servicio técnico.

WARNING

High voltage. Don't open cover.

Handle only by technical service.

PISO

Floor DoorStair

PLATEA Plus

0000000000

Nº serie

(*) Second camera activation and call to a slave porter's exchange functions require an internal

modification of the monitor. If any of these functions are required, contact with your nearest

authorized distributor.

Second camera activation disables the intercomm function and call function to a slave

porter's exchange disables optional device function.

MONITOR DESCRIPTION MONITOR DESCRIPTION

escription of the Platea Plus

monitor.

unction push buttons.

escription of the identification

label.

For an easiest repair, replacement or increasement

of the existing monitors, fill the indentifying label

information.

MASTER: master monitor.

SLAVE: slave monitor.

INTER: slave monitor with intercom function.

A1: monitor connected to an auxiliary device.

CODE: push button code (see page 10).

STAIR: building code (see page 12).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Golmar Plateau Plus Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Golmar Plateau Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info