Bedienungsanleitung Google Nexus Q (Seite 7 von 27) (Englisch)

589792

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Network requirements

Your Android phone or tablet controls Nexus Qs in

your home via a local Wi-Fi network. You need

Wi-Fi with a strong signal in each room where you

want to set up a Nexus Q.

You also need a reliable connection to the

Internet. Nexus Q can use either Wi-Fi or Ethernet

to stream music and videos directly from Google

Play. It uses Wi-Fi by default. To use Ethernet for

this purpose, connect an Ethernet cable to the

Ethernet port.

Ethernet

Ethernet can't entirely replace Wi-Fi. When your

Nexus Q is connected to an Ethernet network, it

uses that network to stream music from your

Google Music library, but your Android phone or

tablet must use Wi-Fi to communicate with the

Nexus Q. When a Nexus Q is connected to

Ethernet, the Android device needs to be in range

of a Wi-Fi access point rather than within range of

the Nexus Q.

For Ethernet to work with Nexus Q, it must be on

the same subnet as the Wi-FI network. For

practical purposes with most home networks, this

means it should be plugged into the same router

that's providing the Wi-Fi.

Bluetooth

During setup only, Nexus Q requires Bluetooth. If

your device has Bluetooth turned off, you'll have a

chance to turn it on.

Ifyourdevicestillcan'tndaNexusQtopairwith:

• Make sure you're in the same room with

your Nexus Q. Bluetooth works best over

short distances.

• Confirm that Bluetooth is turned on. For

example, on a phone running Android 4.0 or

 higher,openSettingsandmakesurethe 

Bluetooth switch is turned On.

Wi-Fi

Nexus Q uses Wi-Fi to communicate with your

Androiddeviceand,viayourrouterandISP,with

the Internet. The Wi-Fi network must support

802.11 a/b/g/n at 2.4GHz or 5GHz. To minimize

interference from other devices, use 5GHz.

If your phone or tablet has Wi-Fi turned off, you'll

have a chance to turn it on during setup.

Ifyourdevicestillcan'tndaW-Finetwork:

• Confirm that Wi-Fi is turned on. For

example, on a phone running Android 4.0 or

higher, open Settings and make sure the

Wi-Fi switch is turned On.

• Make sure your Wi-Fi is functioning

correctly and has a strong signal at the

Nexus Q's location.

• If your router is locked to specific MAC

addresses, you'll see a message during

setup that Nexus Q can't connect with

Wi-Fi. The message includes that Nexus

Q's MAC address, which you can then add

to your router's list.

• If your router is locked to specific IP

addresses, you may need to reconfigure it.

• Restart your router.

• If the signal remains weak at the Nexus Q's

location, set it up somewhere else with a

better signal. Use a phone or tablet to check

the strength of the Wi-FI signal at a potential

new location.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Google Nexus Q Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info