Bedienungsanleitung Gorenje b 8980 (Seite 3 von 14) (Englisch)

330553

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Instructions for use, installation and connection

• Preheating of oven is necessary only if recommended by the

recipe or if written in the chart below.

• Heating of empty oven consumes a lot of energy. Save it by

baking several pizzas or cakes consecutively, one after the

another, while the oven is still warm from the previous

one.Towards the end of baking, the oven may be switched

off about 10 minutes before the pletion, thereby making use

of the remaining.

Oven

Electronic program clock with temperature display

1 – Timer

2 – Period of operation

3 – End of operation

4 – Reset

5 – Setting button (+) and (-) (certain models only)

Note: This button is operated the following way: to increase

settings (+) turn it to the right and hold in that position, and to

decrease settings (-) turn it to the left and hold!

Setting the time of day

After connecting the appliance to the mains, the display

indicates flashing zeros (0.00) and AUTO. Press buttons (2)

and (3) at the same time (and release them). When symbol

(S4) starts flashing, use button (5) to set the exact time of day.

When the symbol (S4) stops flashing, the clock starts running.

After setting the time of day, the clock is ready for operation.

Semi-automatic mode with defined period of operation

Press button (2). Display indicates 0.00 and flashing 'AUTO'

(symbol (S3)). Use button (5) to set the desired period of

operation. Time can be set in 1 minute periods. Maximum

preset period of operation is 10 hours.

When the desired time is set after a few seconds the symbol

‘AUTO' stops flashing and the countdown begins. The display

indicates oven temperature. By pressing the button (2) you can

check the remaining time and correct it if required. When the

countdown is completed, a beep is heard (symbol 'AUTO' is

flashing). The oven is automatically shut off and the preset

temperature is erased!

Sound signal is switched off automatically after 5 minutes, if it

is not stopped before by pressing any button (symbol ‘AUTO’

goes off).

Semi-automatic mode with preset end of operation

Press button (3) and the display indicates time of day along

with flashing 'AUTO'. Use button (5) to set the end of operation

time (this must naturally be more than the actual time of day).

Once the end time is set, the symbol 'AUTO' stops flashing

after a few seconds, and the display indicates oven

temperature.

When the time of day reaches the preset end time of roasting,

sound signal indicates the end of operation (symbol 'AUTO' is

flashing). Oven is automatically switched off and the preset

temperature is deleted!

Sound signal is switched off automatically after 5 minutes, if it

is not stopped before by pressing any button (symbol ‘AUTO’

goes off).

Automatic mode with preset period and end of

operation

Press button (2) and use button (5) to set the desired time.

Then press button (3) and the display indicates the nearest

possible time of the end of operation.

Symbol (S2) goes off and 'AUTO' is on if the end time is higher

than the actual time of day + period of operation. Oven is in the

stand-by mode and starts operating automatically according to

the preset times.

Example:

Time of day = 12:00, operation period is set to 1:30, end of

operation at 14:00. This means that oven will start working at

12:30.

Timer

Timer is used to perform only the signaling function, and it

does not switch the oven off.

By pressing button (1) display indicates 0.00 and (S1) is

flashing. Use button (5) to set the desired time. After a few

seconds the symbol (S1) stops flashing, and the countdown

starts.

Display indicates time of day or oven temperature (if the oven

is in operation).

By pressing button (1) you can check the remaining time and

correct it as required.

When the countdown is completed, a flashing symbol (S1)

appears and the end is signaled by the beep, which goes off

automatically if it is not interrupted by pressing any button.

Deletion of any time-related program and/or

temperature

Any time settings and the temperature, except the timer, may

be deleted at any time by pressing button (4) for 3 seconds.

Preset time programs and the temperature are automatically

stopped.

Attention:

If you press button (4) for 3 seconds during oven

operation, the preset temperature is erased and oven is

automatically switched off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje b 8980 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info