Bedienungsanleitung Gorenje b 9010 al (Seite 6 von 17) (Englisch)

330554

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

Instructions for use, installation and connection

The oven may be controlled in two ways

1 By selecting the type of food

2 By selecting the function mode

Switching between the two control modes

• The oven is off:

− If mode (1) is selected, you may switch to mode (2) by

pressing the sensor (2) twice (if oven selector is on

illumination only, one touch of the sensor is enough). All

settings relevant to mode 1 are erased.

− Similarly you may switch from mode (2) to mode (1) (in

such cases touch sensor (1) twice).

• The oven is on:

− Switching is not possible.

− If you still wish to change the function mode, first switch

the oven off by touching the ON/OFF sensor (5) (signal

lamp (5a) is flashing) and then select the desired

function mode.

Food selection mode

This mode is appropriate for the preparation of chosen food

with automatic setting of mode, temperature and operation

time.

• Touch the food selection sensor and select the type of food

(appropriate symbol and relevant function mode are lit, as

well as the temperature and operation time)

• Touch the ON/OFF sensor (5) to start the operation. After

the expiry of the set time the oven is switched off

automatically.

• In case of different quantity of food, you may still use this

mode, but you must change the operation time and the

temperature accordingly.

• You may however use the end of operation function (see

»End of oven operation« section).

While the signal lamp (5a) is flashing, you may change

settings at random. If the oven is not switched on in

approximately 15 seconds after the last touch of any sensor,

it will switch off automatically.

After the oven is switched on (signal lamp 5a is lit) you

may revoke the setting by consequent touch of the ON/OFF

sensor (5) (signal lamp 5a is flashing) and the oven will

switch off automatically after approximately 5 seconds.

Table of data for selected food (with a sensor 1)

Food type

Pork

chops

whole

Pork

chops

fish

Chicken Pizza Biscuits

and

muffins

Rising of

dough

Raisin

cake

Bread Roast

beef

Defrosting Cleaning

Function mode

Preset

temperature (°C)

195 250 170 200 160 40 160 200 220 - 50

Preset time

(h/min)

1:50 0:25 1:00 0:10 0:25 - 1:00 1:15 1:50 - 0:30

Possibillity of max.

set temperature (°C)

250 250 250 250 250 220 250 250 250 - 220

Weight (in kg)

1 4x0,2 1 1x0,4 3x0,3 - 1,1 1 1 - -

Operation mode selection

This mode is used when you wish to prepare any unspecific

type and quantity of food. You may select the function mode,

oven temperature, operation time, time when you wish the food

to be ready, or roasting with the meat probe and alarm timer.

Once the desired function mode is selected, and other

settings regulated, the oven must be switched on by

pressing the ON/OFF sensor (5) within 15 seconds,

otherwise all settings are rendered void.

The appropriate function mode is selected by pressing the

mode selection sensor (2) (the display indicates the selected

function mode).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje b 9010 al Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info