Bedienungsanleitung Gorenje B7570E (Seite 4 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

480777

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

• Jog dial 5 may be turned either direction.

• In case you wish to interrupt programmed oven operation,

you must first reset the settings back to 0.00 and press

button 4, to make the symbol AUTO disappear.

• In case of power failure new clock setting is required!

Semi-automatic operation

In this mode you determine the period of oven operation

(period of operation).

Maximum setting is 23 hours and 59 minutes!

Procedure:

Example for easier setting procedure:

Let's set the operation period to 1 hour and 20 minutes (1.20)!

1. Setting the operation period: Press button 2 (display

indicates 0.00 and symbol 7) and turn jog dial 5 until it

shows 1.20 (when you start turning the jog, symbol AUTO

is lit). When this is set and you stop turning the jog, after 5

second lapse the display indicates daily current time and

symbols AUTO and 7 are lit.

2. Turn the oven on: Use oven buttons to set the heating

mode and roasting temperature.

3. Oven starts operating immediately after turning on (start of

roasting/baking); symbols AUTO and #7 are lit during the

operation.

4. After the expiry of preset time – in our case after 1 hour

and 20 minutes -

− the oven stops automatically (roasting/baking is over),

− sound alarm is heard which may be switched off by

pressing any button 1, 2, 3 or 4, or left to switch on

automatically after 2 minutes,

− symbol 7 disappears,

− symbol AUTO is flashing.

5. Turn the oven off, press button 4 and the symbol AUTO 3

disappears! When the symbol AUTO disappears the oven

is ready for conventional (manual) operation.

Automatic operation

In this mode you determine the period of oven operation

(period of operation) and the switching off time (end of

operation).

Maximum setting is 23 hours and 59 minutes! Setting of

switching off time is = current time + maximum 23 hours and

59 minutes).

CAUTION!

Oven will not operate in automatic mode unless you turn it on

by means of selected buttons!

Automatic operation procedure

Example for easier setting procedure:

Let's set the operation period to 1 hour and 20 minutes (1.20),

and the end of operation at 13.52!

1. Check whether the clock is set to indicate current time of

day.

2. Setting the operation period: Press button 2 (display

indicates 0.00 and symbol 7) and turn jog dial 5 right, until

it shows 1.20 (when you start turning the jog, symbol

AUTO is lit). When this is set and you stop turning the jog,

after 5 second lapse the display indicates daily current time

and symbols AUTO and 7 are lit.

3. Setting the end of operation Press button 3. Turn the jog

dial 5 to set the desired time (display indicates the nearest

end of operation = current time + preset period of

operation), until 13.52 appears, when the oven is supposed

to stop operating. When you stop turning the jog, after

approximately 5 second lapse the display indicates daily

current time and symbol 8 is lit. Symbol 7 disappears (and

reappears when oven starts operating after certain time).

4. Turn the oven on: Use oven buttons to set the heating

mode and roasting temperature.

5. Oven starts automatic operation at the selected time (in

our case at 12.32 hrs) (start of roasting/baking, arrow 2

disappears), operates for 1 hour and 20 minutes, and stops

operating at 13.52 hours; symbol 7 is lit during the

operation.

6. When the oven stops operating:

− intermittent sound alarm is heard which may be switched

off by pressing any button 1, 2, 3 or 4, or left to switch on

automatically after 2 minutes,

− symbol 7 disappears,

− symbol AUTO is flashing.

7. Turn the oven off, press button 4 and the symbol AUTO

disappears! When the symbol AUTO disappears the

oven is ready for conventional (manual) operation.

Program timer as alarm

Program timer may be used independently (not connected with

oven operation) as a simple alarm, to remind you of certain

preset future time.

Setting procedure

Press button 1 (display indicates 0.00 and symbol 8) and use

jog dial 5 to set the time you wish to be alarmed. Maximum

setting span is 23.59.

When the countdown expires you will hear intermittent sound

signal, which may be switched off by pressing any of the

buttons 1, 2, 3 or 4, or it goes off automatically after 2 minutes.

Dimmed display illumination

Between 22.00 and 5.59 hours the display illumination is

automatically dimmed if the program timer is not in operation

during this period.

Child lock symbol

Child lock activation

− Clock must me set to manual operation.

− Press simultaneously button 1 and 2 for 8 seconds. Display

indicates »On«.

− Turn the rotating button 5 in the direction »+«; display

indicates »OF« and symbol 9 is illuminated. Display then

switches to the current time of day.

− Child lock is now active. If you attempt to set the time with

the buttons 2 or 3 the clock will remain idle.

Lock deactivation

− Clock must me set to manual operation.

− Press simultaneously button 1 and 2 for 8 seconds. Display

indicates »OF«.

− Turn the rotating button 5 in the direction »+«; display

indicates »On« and symbol 9 goes off.

WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO INFLUENCE ON THE

OPERATION OF THE APPLIANCE.

Gorenje B7570E Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gorenje B7570E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info