Bedienungsanleitung Gorenje DFGA9575BX (Seite 11 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

603631

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

CONTROLS

P1: Filter alarm reset

P2: Motor on/off - 1st speed

P3: 2nd speed

P4: 3rd speed

P5: 4th speed

P6: Lift panel up/down (during opening the panel can

be stopped at the desired height by pressing the

button a second time).

5' Timer function:

Holding the buttons P2, P3, P4 or P5 pressed down

(>2") the 5' Timer function is activated. When the

time has run out, the motor turns off and the lift

closes. The LEDs change from High to Low intensity.

When the function is active, the LED corresponding

to the current motor speed blinks.

Filter alarm display:

Grease filters: After 30h of motor operation, the LED

of the P1 button comes on for 30'' every time the

motor turns off.

Charcoal filter: After 120h of motor operation, the LED

of the P1 button blinks for 30'' every time the motor

turns off.

CONTROLS

P1: Motor on/off - 1st speed

P2: 2nd speed

P3: 3rd speed

P4: 4th speed

P5: Lift panel up/down (during opening the panel can

be stopped at the desired height by pressing the

button a second time).

5' Timer function:

When the motor is on, holding the keys P1-P4

pressed down (depending on the speed set), the 5'

timer function is activated. When this function is

active, the LED corresponding to the speed (L1-L4)

blinks. When the 5' have elapsed, the motor turns off

and the carriage closes.

Filter alarm display:

After 30 hours of motor operation, the LEDs L1-L5

come on for 30'' each time the motor is turned off.

After 120 hours of motor operation, the LEDs L1-L5

blink for 30'' each time the motor is turned off.

To reset the alarm, press any one of the keys P1-P5

for 2" during alarm display.

ATTENTION

SAFETY SYSTEMS

In order to function correctly the product is equipped

with a series of safety devices which are also

intended to prevent any injury caused by

inappropriate use.

In any case be very careful in using the product,

above all the parts in motion.

ALARM ON CONTROL (all models)

1. All LEDs flashing: this means that the telescopic

trolley is locked. Wait 30” and then press the UP/

DOWN button to release the trolley

2. UP/DOWN button LED flashing: this means that

the front panel of the filters is not closed properly.

Reposition it correctly.

MAINTENANCE

! Before cleaning or maintenance cut the power.

If the light spot is damaged, it must be replaced only

by the manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard

Cleaning the hood

WHEN TO CLEAN IT: clean it at least every 2

months to prevent the risk of fire.

EXTERNAL CLEANING: use a cloth moistened in

lukewarm water and neutral detergent (for painted

hoods); use specific products for steel, copper or brass

hoods.

INTERNAL CLEANING: use a cloth (or brush) soaked

in denatured ethyl alcohol.

WHAT NOT TO DO: do not use abrasive or corrosive

products (e.g. metal sponges, brushes, too hard

brushes, very aggressive detergents, etc.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje DFGA9575BX Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info