Bedienungsanleitung Gorenje EC55CLI1 (Seite 9 von 17) (Englisch)

728636

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

EN 8

ELECTRONIC PROGRAM TIMER

A Function selection knob

1 Oven delayed start

2 End oven operation

3 Minute minder

4 Time display

5 Clock

 Select the time settings by consecutively pressing

the (A) knob. Selected symbol will flash on the

display. Rotate the (A) knob to set the function

and press to confirm. Clock hands will

automatically move to time display. The set

symbols will remain lit.

 Each time you press the (A) knob, this will be

confirmed by a short acoustic signal.

 Press and hold the (A) knob for 2 seconds to

delete the set function.

SETTING THE TIME OF DAY

 If the time display symbol (4) is flashing (after

connecting the appliance for the first time or

following a power failure), press the (A) knob and

hold it for two seconds until the flashing stops.

 Then select the time display (4) by consecutively

pressing the (A) knob. Time display will flash

when selected.

 Rotate the (A) knob to set the time.

 Confirm the setting by pressing the (A) knob

again. If nothing is pressed, the setting will be

stored automatically after a few seconds.

OVEN OPERATION WITHOUT TIMER

SETTINGS

 After connecting the appliance to the power

mains for the first time or after a power supply

failure, time display symbol (4) will flash.

 In order for the oven to operate, press the (A)

knob and hold it for two seconds. Time display will

stop flashing.

 The oven can be used without restrictions if no

timer settings are made.

OVEN OPERATION WITH PROGRAM

TIMER SETTINGS

Program timer can be used to program oven

operation in two ways:

 Setting the stop time - the oven will stop

operating at the preset time.

 Setting delayed start - the oven will

automatically start and stop operating at a preset

time.

SETTING THE STOP TIME

This mode allows you to set the time at which you

wish the oven to stop operating. The longest

possible setting is 15 hours from the current time.

 Check if the clock is set accurately to current

time.

 Select the (2) symbol by consecutively pressing

the (A) knob until the symbol starts to flash.

 Rotate the (A) knob to set stop time.

 Confirm the setting by pressing the (A) knob

again. Clock hands will move to time display. The

oven stop symbol will light up.

 Switch on the oven (use the oven knobs to set the

operating mode and temperature). The oven will

start operate at the set time and stop and the

selected stop time.

 When the clock reaches the selected stop time,

the oven will be switched off, which will also be

indicated by an intermittent acoustic signal. The

acoustic signal can be switched off by pressing

the (A) knob; otherwise, it will switch off

automatically after 1 minute. The symbol (2) will

flash. To continue cooking, press the (A) knob

and hold it for 2 seconds, and set a new cooking

time if necessary.

SETTING THE DELAYED START

This mode allows you to specify the time when the

oven should start to operate (cooking start time) and

the time when you wish the cooking process to stop

(end time). Stop time may be delayed by a maximum

of 12 hours relative to the current time of day;

cooking duration may be set to a maximum of 3

hours.

 Check if the clock is set accurately to current

time.

 Setting the start time: Select the (1) symbol by

pressing the (A) knob. Rotate the (A) knob to set

the start time and confirm it by pressing the (A)

knob. The symbol for the end of operation will

start to flash (2).

 Set the stop time: Rotate the (A) knob to set the

stop time and confirm it by pressing the (A) knob.

 The clock hands will turn to clock display.

Symbols (1) and (2) will be lit up.

 The timer will wait for the start of the cooking

process.

 Set the oven – use the oven knobs to set the

operating mode and temperature.

 The oven will start to operate at the start time,

and stop operating at the stop time.

 When the clock reaches the selected stop time,

the oven will be switched off, which will also be

indicated by an intermittent acoustic signal. The

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje EC55CLI1 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info