Bedienungsanleitung Gorenje ect 680 sc (Seite 7 von 13) (Englisch)

335439

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Instructions for use, mounting and connection

Power setting Maximum power time

(in seconds)

182

2 164

3 246

4 328

5 410

682

7 164

8 164

Switching the extended hotplate rings on (hotplates 2 and

Switch the relevant hotplate ( 2 or 4) and consequently switch

the extended hotplate ring by pressing the relevant sensor (see

the control element board illustration). The LED signal lamp

above the indicator displays the extended ring is on. Now

select the random heating power for both hotplate rings

together. Extended ring may be switched off either by

consequent pressing the sensor or by reducing the heating

power to "0", as well as by simultaneous pressing of both the

(-) and (+) sensor. It may of course be switched off also by

switching off the entire hob.

Switching the second hotplate ring on

The rear right hotplate (4) is equipped with the extended

hotplate ring, which is switched on by pressing the special

second ring sensor. The signal lamp above the indicator

displays the ring is on.

Switching the third hotplate ring on

(certain models)

The front left hotplate (2) is equipped with two extended

hotplate rings. To switch the second ring on, press the special

second ring sensor (top left). The LED signal lamp above the

indicator displays the ring is on. To switch on the third ring

press the same sensor once again, another LED signal lamp is

on. Both extended rings are switched off by repeated pressing

the sensor. They may also be switched off by switching off the

relevant hotplate or the entire hob.

Blocking the hob operation

This function mode is intended as a protection against

accidental start or change of heating power by children or pets.

The hob may be blocked by pressing the relevant sensor for

about 3 seconds, illuminating the LED signal lamp above the

sensor. The hob may be blocked both with the hob switched on

or off. The functioning of the complete hob is blocked, except

for the main hob switch and the blocking sensor. In the blocked

mode all hotplates may be switched off only by pressing the

main ON/OFF hob sensor, while the blocked mode remains

active. To activate a particular sensor in the blocked mode, the

signal lamp goes on for a few seconds. If a particular hotplate

is in timer automatic mode, the countdown proceeds normally

and the hotplate is switched off at the expiry of preset time,

signaling the end by the triple beep.

The blocked mode may be switched off at anytime by pressing

the sensor. Short beep confirms the action, and the LED signal

lamp goes off.

Switching the hotplate off

Particular hotplate is switched off either by pressing the sensor

(-) to bring the heating power to "0", or by simultaneously

pressing both the (+) and (-) sensor. Hotplate is switched off

automatically after the set timer period elapses. Display

indicates "0" for a short time, then the hotplate is switched off

and the indicator displays the remaining heat "H".

Remaining heat display

Immediately after a particular hotplate is switched off, or in

case the complete hob is switched off, the indicator shows the

letter "H" as a warning that the "hotplate is hot". The period

of this warning signal is calculated in accordance with the

working time and the power setting of the hotplate. When the

warning signal is on do not touch the hotplate or place any

temperature sensitive objects on the relevant hotplate. Danger

of burns!

When the indicator goes off, the hotplate surface is cool

enough to be touched safely.

In case of mains interruption, the warning signal »H«

reappears when the power comes back, and remains displayed

until the calculated time from the last appearance has expired.

It is therefore possible that the "H" indication is still on if the

power failure took long time, although the hotplate is

completely cold, but it may also be still hot in case the power

failed for only a short period.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje ect 680 sc Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gorenje ect 680 sc

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info