Bedienungsanleitung Gorenje ECT648 BCSC (Seite 15 von 31) (Englisch)

786541

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

•Select the desired timer display by pressing the (D) key (see section Changing the set cooking

time). The set timer will be displayed and the indicator light for the relevant cooking zone will light

up.

•Touch the (M) key to set the value to "0" , or press the (N) and (M) key simultaneously

to immediately reset the value to "0" .

Pausing the cooking process with Stop&Go

The Stop&Go function allows you to pause (or suspend) the cooking process, but keep all your settings.

To pause the cooking process, touch the Stop&Go key (C). An indicator light (C1) will light up above

the key. Settings on the displays will start to flash. All settings are frozen, and the cooking zone are

not heated (the heaters are switched off).

All keys except on/off and Stop&Go are inactive. To deactivate the Stop&Go function, touch the

Stop&Go key again. Indicator light (C1) will switch off.

If the Stop&Go function is not switched off, the entire hob will automatically switch off after 10 minutes.

Memory function

The memory function allows restoring the most recently selected settings in 5 seconds after the hob

is switched off. This is convenient when, for example, you accidentally press the on/off key and switch

off the entire hob, or if the cooking hob is switched off automatically due to some spilt liquid.

After switching off with the on/off key, you have 5 seconds to switch the control panel back on, and

further 5 seconds to press the SStop&Go key to restore your settings. During these 5 seconds, the

indicator light above the settings restore key will flash. All settings active before the hob was switched

off will be restored.

Automatic switch off

If the keys are activated for too long during cooking (e.g. due to spilt liquid or an object placed over

the sensor keys), all cooking zones will be switched off after 10 seconds. The symbol will flash on

the display. The object should be removed, or the spilt liquid should be cleaned, from the sensor keys

within 2 minutes; otherwise, the cooking hob will switch off automatically. The most recent settings

can be restored with the memory function using the Stop&Go key

Switching off the cooking zone

To switch off a cooking zone, use the relevant key to set the value to "0" . To quickly switch off

the cooking zone, touch the relevant and keys simultaneously. You will hear a short beep, and

"0" .will be displayed on the display unit.

If the power of all cooking zones is set to "0" ., the cooking zone will switch off automatically after

a few seconds.

Residual heat indicator

As soon as a hot cooking zone or the entire cooking hob is switched off, the following will be displayed:

•"H" cooking zone is hot;

How long this will be displayed depends on the power level and on how long a cooking zone was

activated. When the "H" sign disappears, the cooking zone may still be hot in some cases (power

failure, a hot pan left on the cooking zone etc.). Be careful as there is danger of burns! In case of a

power failure while the cooking zones are still hot, the "H" sign will flash on the display. This indicates

that the cooking zone may or may not be hot, depending on the duration of the power failure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gorenje ECT648 BCSC Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info